Omada SDN Hardware Compatibility
Hello,
I was wondering whether the new omada sdn will support the current generation EAP245v3 and EAP225v3. Would it still be available self hosted or will it be cloud only?
Also will it support current jetstream switches such as the TL-SG1016PE, TL-SG3424P v1, or the T1500G-10MPS?
I'm looking to purchase a gigabit poe switch and I was wondering whether it would be worth it to buy a jetstream over a used one for the omada SDN.
Thanks!
Edit: Thanks for pinning the post admin, I am glad this post is helping others! I have edited the title to more accurately reflect what this post is in case any new posters confuse this for a general suppor thread. Thanks again!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I am guessing that anything lower hardware version wise will not be supported with the new firmware
T1600G-52TS 1.0 is the one I have, so just wanted to double check.
Thanks
- Copy Link
- Report Inappropriate Content
Dear @Dustiebin,
I am guessing that anything lower hardware version wise will not be supported with the new firmware
T1600G-52TS 1.0 is the one I have, so just wanted to double check.
Yes, you are correct. The lower hardware version T1600G-52TS 1.0 won't support Omada SDN.
- Copy Link
- Report Inappropriate Content
jabolfh wrote
@nojak Thanks yeah I downloaded and installed the new controller and it didn't recognize the T1500G-10mps. I was kinda disappointed since the manual for Omada SDN showed it should here: https://static.tp-link.com/Omada%20Controller%20Upgrade%20Guide_20200615.pdf
I guess it makes sense for TP-link not to support the T1500G-10MPS since the TL-SG2210MP is pretty similar. Just kinda disappointed I have to go return the T1500G-10MPS and wait for the new one to be released.
Thanks
Does anyone got success to manage a 6120 router from SDN controller ?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
R1D2 wrote
Hi JSchnee21,
IMO the symbol on the left is a stylish user with a WiFi radio built into his brain.
As for the green symbol and the »na« label I have no idea. Maybe guest/user indicator? Portal authorized? I guess we have to wait for the User's Guide to find out.
It would also be nice to be able to make the columns more compact. E.g. auto width, font size, etc. Currently with the scroll bar all the way at the bottom, and very wide column widths, it's difficult to move around with 50-100 or so clients.
Definitely. Fixed table size is something which bothered me since controller version 2.x and it was the reason I made an alternative web UI layout for V2.7 years ago. But next version changed CSS element names, so the alternative style quickly became obsolete.
If the web designers would let the browser decide how to format table cells, listings could look much better on small screens (e.g. 13"/15" laptops). I guess they all have 54" screens on their desks nowadays.
See also this post here, I did a quick test with modified CSS in the browser to demostrate this.
Maybe we could create a browser style sheet which overrides certain settings in the web UI, but since this is really much work and one cannot be sure that CSS element names change in next version, it would be better if TP-Link could improve the table layout in the sources. It would just require to remove fixed-width styles and add the nowrap attribute for white-space handling inside table cells.
Tables are well-suited for tabular data, but if a fixed cell size is used, the table layout becomes dependend on screen dimensions and resolutions.
For example, look at this page:
Oops. Clearly a nowrap attribute is missing in the headers. There also is too much unused white space in the table. A browser could optimize this easily for the actual screen if formatting would be left to the browser.
@R1D2 the green symbol means the client device is in power save state,
according with the advanced setting from the EAP
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Is the T1500G-8T(UN) 2.0 sold in the US. The devices listed on the online retailers aren't clear about the version.
Thanks
- Copy Link
- Report Inappropriate Content
@Fae Just bought a 2210P, and ended up with the 3.0 variant.
Can you give us an update on the status of SDN supported firmwares?
Can we expect SDN compatible FW anytime soon, or should i pursue a replacement?
- Copy Link
- Report Inappropriate Content
Fae wrote
Hi All,
The SDN firmware has been released for the following switches:
[...]
T1500G-8T(UN) 2.0
[...]
For new Omada products, please check the Omada SDN Compatibility List for details. Thank you so much for your support!
@Fae Thanks for your information!
Could you help with figuring out which model exactly is meant by this T1500G-8T switch?
When I search the TP website, I find this one:
https://www.tp-link.com/de/support/download/tl-sg2008/v2/
This has at least the "T1500G-8T" contained and also "v2", but for this model there is no firmware update available.
I also find this one:
https://www.tp-link.com/de/support/download/t1500g-8t/
For this model there is a firmware update available.
Are those models the same?
Which one should I buy for management with SDN?
It is a pita very difficult to find the correct hardware versions online.
Often the model numbers do not match the descriptions. I don't know how many times I found a
For example: https://www.idealo.de/preisvergleich/OffersOfProduct/6481722_-jetstream-8-port-gigabit-switch-t1500g-8t-tp-link.html
A lot of those switches are labeled "T1500G-8T(TL-SG2008)" and should be PoE powered.
I think this combination does not really exist.
Thanks,
Ben
- Copy Link
- Report Inappropriate Content
Dear @BenHH,
Could you help with figuring out which model exactly is meant by this T1500G-8T switch?
When I search the TP website, I find this one:
https://www.tp-link.com/de/support/download/tl-sg2008/v2/
This has at least the "T1500G-8T" contained and also "v2", but for this model there is no firmware update available.
Actually, there is no TL-SG2008 V2 available, the website information is wrong and I've reported it to the administration to correct it.
If the switch is labeled with "T1500G-8T(TL-SG2008) V2", then it's T1500G-8T V2, we can upgrade the firmware to support SDN.
The online website may not tell the hardware version of T1500G-8T, perhaps you can try to confirm it with the salesman online.
In addition, there is TL-SG2008 V3 only, which can be taken as a replacement for T1500G-8T V2, and it's compatible with Omada SDN from birth, so if it is TL-SG2008 V3, the product description should claim that the switch supports Omada SDN and you don't need to check the hardware version to confirm it.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 33327
Replies: 91