Business Community > Controllers > OC200 FW Ver: 1.7.0 not updating DST time. Caused scheduled backup to fail.
< Controllers

OC200 FW Ver: 1.7.0 not updating DST time. Caused scheduled backup to fail.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
123

OC200 FW Ver: 1.7.0 not updating DST time. Caused scheduled backup to fail.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
OC200 FW Ver: 1.7.0 not updating DST time. Caused scheduled backup to fail.
OC200 FW Ver: 1.7.0 not updating DST time. Caused scheduled backup to fail.
2020-07-14 18:17:50
Model: OC200  
Hardware Version: V1
Firmware Version: 1.7.0 Build 20200703 Rel.59609

 Upgraded this AM and my 12 noon backup failed with this message.  I checked and the OC200 when the message appeared and its showing the system time as 11:01.

 

[Failed]Auto Backup failed to execute with generating file AutoBackup failed because autobackup schedule time was expired.
Jul 14, 2020 11:00:00   am

 

Only thing it is was 12:01 at the time.  I checked my NTP server settings and TZ settings and they didn't change from what they were before I upgraded this AM.

 

(UTC-06:00) Central Time (US & Canada)

Primary NTP Server :           132.163.96.4
Secondary NTP Server :       132.163.96.6

 

Tried changing the NTP Servers but didn't make a difference.

 

Anyone got any ideas?

 

  0      
 
  0      
 
#1
Options
29 Reply
Re:OC200 FW Ver: 1.7.0 not updating DST time. Caused scheduled backup to fail.
2020-07-16 12:33:12

@JFND 

 

The new controller doesn't have daylight  saving time, it's talked in other thread, so there is one hour difference due to that and I think it is the cause. 

  0  
  0  
#2
Options
Re:OC200 FW Ver: 1.7.0 not updating DST time. Caused scheduled backup to fail.
2020-07-16 17:02:33

@Yannie  Thanks for the reply.

I set it back to factory defaults this AM and manually set it up again.  Well see it that works.  If it does I'll set it to EST till DST is over.  indecision

 

  0  
  0  
#3
Options
Re:OC200 FW Ver: 1.7.0 not updating DST time. Caused scheduled backup to fail.
2020-12-17 11:23:06

@JFND 

How did you fixed it?

I have the same problem with the latest firmware and still it is not fixed. 

System time is wrong what to do ?

  0  
  0  
#4
Options
Re:OC200 FW Ver: 1.7.0 not updating DST time. Caused scheduled backup to fail.
2020-12-18 08:00:45

Dear @papayeya ,

 

I have the same problem with the latest firmware and still it is not fixed. 
System time is wrong what to do ?

 

The problem has been fixed in the latest firmware 1.7.1, you may follow the link below for the update.

 

https://www.tp-link.com/en/support/download/oc200/#Firmware

 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#5
Options
Re:OC200 FW Ver: 1.7.0 not updating DST time. Caused scheduled backup to fail.
2020-12-18 23:11:27

@Fae 

 

Mine runs the latest Firmware 1.7.1

 

 

The system date is 24th Nov. It doesnt change at all. 

 

If I  came next week it will be stilll 24th of Nov.

 

This caused some problem for our Vouchers. Some they never expires.

 

I updated the ntp servers and still.

 

 

How to fix it please.

  0  
  0  
#6
Options
Re:OC200 FW Ver: 1.7.0 not updating DST time. Caused scheduled backup to fail.
2020-12-21 11:23:04

Dear @papayeya,

 

The system date is 24th Nov. It doesnt change at all.  

If I  came next week it will be stilll 24th of Nov.

This caused some problem for our Vouchers. Some they never expires.

I updated the ntp servers and still.

 

Could you please upload a screenshot of the system date page?

What NTP server is configured on the OC200? Are you able to ping the NTP server in your network?

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#7
Options
Re:OC200 FW Ver: 1.7.0 not updating DST time. Caused scheduled backup to fail.
2020-12-23 07:15:52

@Fae 


Kindly find below:

 Site settings, Controller Settings, Controller Status. Notice that in the last picture (Controller Status) The date is 24th of November. This date doesn't change at all meaning tomorrow also will be 24th of Nov . We have a ticketing problem that when we give 1 hour voucher the time limit doesn't work and the client when he comes tomorrow it will allow him to use the internet although 1 hour voucher is already expired.

  1  
  1  
#8
Options
Re:OC200 FW Ver: 1.7.0 not updating DST time. Caused scheduled backup to fail.
2020-12-23 08:14:55

@JFND 

 

You can notice here  that the date of the user interface is correct.

 

  0  
  0  
#9
Options
Re:OC200 FW Ver: 1.7.0 not updating DST time. Caused scheduled backup to fail.
2020-12-23 08:15:34

@papayeya 

Yes we can ping any NTP server we entered. 

  0  
  0  
#10
Options
Re:OC200 FW Ver: 1.7.0 not updating DST time. Caused scheduled backup to fail.
2020-12-26 07:11:10

@Fae 

 

Any updates?

  0  
  0  
#11
Options
123

Information

Helpful: 0

Views: 6200

Replies: 29

Related Articles
 OC200 Upgrade 1.7.0
2306 0
 System time in OC200 is not updating in firmware 1.7.1
861 1
4.4.4 Daylight Savings Time / DST / Summertime Not Working
960 0
 Ontario Summer Time / DST
803 0
A lot of Alerts after OC200 FW update
963 0
Time difference between Live and recording, after DST.
116 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.