TL-R605 not visible in Dashboard and Speedtest loop

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
123...

TL-R605 not visible in Dashboard and Speedtest loop

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
56 Reply
Re:TL-R605 not visible in Dashboard and Speedtest loop
2020-11-26 13:47:53

Only addition I can give is I am running: 

Ubuntu 20.04.1 LTS on a Raspberry Pi 3

openjdk version "1.8.0_275"
OpenJDK Runtime Environment (build 1.8.0_275-8u275-b01-0ubuntu1~20.04-b01)
OpenJDK 64-Bit Server VM (build 25.275-b01, mixed mode)


 

  0  
  0  
#12
Options
Re:TL-R605 not visible in Dashboard and Speedtest loop
2020-11-27 02:39:13

Dear @Anconakip

 

For me the same problem. I have installed the TL-R605 yesterday and it works fine in my network. It is also connected in my Omada controller software 4.2.4 on Windows 10.

But on my dashboard there is the "N/A". When i click on the speed test it will go testing and testing and after a while it stops and says test failed, try again.

 

Did you get the same "General Error" message? If possible, could you please provide a screenshot of the error page for checking?

 

When it says test failed or shows an error, please visit speedtest.com directly on the PC to test the speed, check if the test runs normally.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#13
Options
Re:TL-R605 not visible in Dashboard and Speedtest loop
2020-11-27 02:40:45

Dear @RBL,

 

Only addition I can give is I am running: 

Ubuntu 20.04.1 LTS on a Raspberry Pi 3

openjdk version "1.8.0_275"
OpenJDK Runtime Environment (build 1.8.0_275-8u275-b01-0ubuntu1~20.04-b01)
OpenJDK 64-Bit Server VM (build 25.275-b01, mixed mode)

 

Thank you for the info, we appreciate your kind feedback on this.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#14
Options
Re:TL-R605 not visible in Dashboard and Speedtest loop
2020-11-27 15:54:08

@Fae 

I see a little box with "general error". When i go to www.speedtest.com this won't work. Looks like the site is offline or do you mean www.speedtest.net? this site will test and show it as it should.

Fae wrote

Dear @Anconakip

 

For me the same problem. I have installed the TL-R605 yesterday and it works fine in my network. It is also connected in my Omada controller software 4.2.4 on Windows 10.

But on my dashboard there is the "N/A". When i click on the speed test it will go testing and testing and after a while it stops and says test failed, try again.

 

Did you get the same "General Error" message? If possible, could you please provide a screenshot of the error page for checking?

 

When it says test failed or shows an error, please visit speedtest.com directly on the PC to test the speed, check if the test runs normally.

 

  0  
  0  
#15
Options
Re:TL-R605 not visible in Dashboard and Speedtest loop
2020-11-27 23:59:52

I made a video of omada's behavior.

 

  • Win10 pro version 20H2
  • java version "1.8.0_271"
  • Omada_Controller_V4.2.4_Windows_32bit&64bit
  • TL-R605
  • 2 x EAP245(EU) v3.0

 

 

MOVIE

Setup location Ship(little cruise): OC200 (2.9.3 Build 20230328 Rel.52390) 1X EAP110 3x EAP245(EU) v3.0 11x EAP245(EU) v4.0
  1  
  1  
#16
Options
Re:TL-R605 not visible in Dashboard and Speedtest loop
2020-11-28 08:19:24

@Lowie 

Lowie wrote

I made a video of omada's behavior.

 

  • Win10 pro version 20H2
  • java version "1.8.0_271"
  • Omada_Controller_V4.2.4_Windows_32bit&64bit
  • TL-R605
  • 2 x EAP245(EU) v3.0

 

 

MOVIE

This is accectly the same problem i have.

  1  
  1  
#17
Options
Re:TL-R605 not visible in Dashboard and Speedtest loop
2020-12-01 22:06:40

@Anconakip 

 

Hi, I am interested in this as will be getting my TL-R605 in another week or two once stock is available from my vendor.

 

Anyway, you verified that on manually visiting speedtest.net via your browser this work's fine no problem. However, as stated within Omada Dashboard it is tripping out.

 

Can you confirm what your ADSL / Modem setting's are when handling traffic from your TPLink Router /Firewall? ie is it on a DMZ? or do you have firewall rules for the TL0605 and Cloud Controller?

 

Also, do you have 1 WAN Connected or do you have multiple WAN's and any form of load balancing?

 

# If you have mutiple WAN's . remove all but 1 and turn of load balancing

# if your Moden/ADSL/Router does have levels of firewall rules for your TPlink Router then try removing them an adding TPlink IP Address as A DMZ.

 

This is assuming you have your Omada controller and other network devices all going through TLR605 and the TL-R605 then connects to the ADSL modem.

 

Kind regards,

RJ Waring

RJWaring
  0  
  0  
#18
Options
Re:TL-R605 not visible in Dashboard and Speedtest loop
2020-12-02 14:04:36

@RJWaring 

RJWaring wrote

@Anconakip 

 

Hi, I am interested in this as will be getting my TL-R605 in another week or two once stock is available from my vendor.

 

Anyway, you verified that on manually visiting speedtest.net via your browser this work's fine no problem. However, as stated within Omada Dashboard it is tripping out.

 

Can you confirm what your ADSL / Modem setting's are when handling traffic from your TPLink Router /Firewall? ie is it on a DMZ? or do you have firewall rules for the TL0605 and Cloud Controller?

 

Also, do you have 1 WAN Connected or do you have multiple WAN's and any form of load balancing?

 

# If you have mutiple WAN's . remove all but 1 and turn of load balancing

# if your Moden/ADSL/Router does have levels of firewall rules for your TPlink Router then try removing them an adding TPlink IP Address as A DMZ.

 

This is assuming you have your Omada controller and other network devices all going through TLR605 and the TL-R605 then connects to the ADSL modem.

 

Kind regards,

RJ Waring

Hello,  my TL-R605 is connected to the modem of our cable supplier (Ziggo). This modem stands in the "bridge" mode. So the TL-R605 has just one WAN connected and no Firewall setting in the provider modem. The TL-R605 is the "boss" in my network.

  2  
  2  
#19
Options
Re:TL-R605 not visible in Dashboard and Speedtest loop
2020-12-03 00:39:20 - last edited 2020-12-03 00:40:07

@Anconakip 

 

LOL my provider is also Ziggo and my modem is also acting dumb. (bridge mode)

 

Setup location Ship(little cruise): OC200 (2.9.3 Build 20230328 Rel.52390) 1X EAP110 3x EAP245(EU) v3.0 11x EAP245(EU) v4.0
  0  
  0  
#20
Options
Re:TL-R605 not visible in Dashboard and Speedtest loop
2020-12-03 06:36:30

Dear @Lowie@Anconakip, @Munnik,

 

If possible, could you please do me a favor to provide the Running Log (go to Services > Export Data) for further analysis?

 

It would be appreciated if you could also tell us the date when you got the general error with the speed test. Looking forward to your reply.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#21
Options
Related Articles