EAP225 V3 - Rename OR BusyBox Guide

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP225 V3 - Rename OR BusyBox Guide

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP225 V3 - Rename OR BusyBox Guide
EAP225 V3 - Rename OR BusyBox Guide
2020-11-23 04:02:09 - last edited 2020-11-26 21:19:16
Model: EAP225  
Hardware Version: V3
Firmware Version: EAP225(US)_V3_2.20.1 Build 20200630

Hi All,

 

Is it possible to rename the EAP225 v3 System Name when the AP is in Stand-Alone Mode (Not Using an Omada Controller). Typically it is designated as EAP225-xx-xx with the "xx-xx" being the MAC Address of the WAP. 

 

If I SSH into the unit I see that it is running a version of BusyBox. Is this at all useful for configuring the AP? and is there some kind of Command Reference or Guide for this BusyBox environment. Perhaps the ability to dump the configuration out to a text file or text format a.k.a you could run the "show configuration" command and get back the running configuration. 

 

Thank you.

  0      
  0      
#1
Options
1 Accepted Solution
Re:EAP225 V3 - Rename OR BusyBox Guide-Solution
2020-11-25 09:25:08 - last edited 2020-11-26 21:19:16

Dear @TL-SG105PE,

 

Is it possible to rename the EAP225 v3 System Name when the AP is in Stand-Alone Mode (Not Using an Omada Controller). Typically it is designated as EAP225-xx-xx with the "xx-xx" being the MAC Address of the WAP. 

 

It's possible if you use the Omada App to manage the EAP in standalone mode.

 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#2
Options
4 Reply
Re:EAP225 V3 - Rename OR BusyBox Guide-Solution
2020-11-25 09:25:08 - last edited 2020-11-26 21:19:16

Dear @TL-SG105PE,

 

Is it possible to rename the EAP225 v3 System Name when the AP is in Stand-Alone Mode (Not Using an Omada Controller). Typically it is designated as EAP225-xx-xx with the "xx-xx" being the MAC Address of the WAP. 

 

It's possible if you use the Omada App to manage the EAP in standalone mode.

 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#2
Options
Re:EAP225 V3 - Rename OR BusyBox Guide
2020-11-25 22:05:23

Thanks @Fae smiley

 

I'll give that ago tonight and report back. 

 

Best,

 

Adam.

  0  
  0  
#3
Options
Re:EAP225 V3 - Rename OR BusyBox Guide
2020-11-26 21:19:07

Works as expected @Fae. Thank you! 

 

 

  0  
  0  
#4
Options
Re:EAP225 V3 - Rename OR BusyBox Guide
2020-11-27 01:17:24

@TL-SG105PE 

 

Works as expected @Fae. Thank you! 

 

Welcome and good to know it works. Thank you for your kind feedback. Hope you enjoy the Internet with Omada products!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#5
Options