Am i able to look at the authentification type of a wireless client ?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Am i able to look at the authentification type of a wireless client ?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Am i able to look at the authentification type of a wireless client ?
Am i able to look at the authentification type of a wireless client ?
2020-11-24 12:43:31 - last edited 2020-11-25 08:20:27
Model: OC200  
Hardware Version: V1
Firmware Version: 1.7.1 Build 20201016 Rel.62818

Hello everybody,

 

could anyone tell me wether it is possible to show the authentification type like wpa2 or wpa3 of a wireless client in the omada sdn controller ?

 

thank you!

  0      
  0      
#1
Options
1 Accepted Solution
Re:Am i able to look at the authentification type of a wireless client ?-Solution
2020-11-25 07:44:54 - last edited 2020-11-25 08:20:27

Dear @Christian2705,

 

could anyone tell me wether it is possible to show the authentification type like wpa2 or wpa3 of a wireless client in the omada sdn controller ?

 

I don't think so. But you can check the authentication type of the SSID in the Omada SDN Controller.

 

 

The default authentication type of the SSID is WPA2-PSK /AES. Only WiFi6 AP such as EAP660 HD supports WPA3-SAE.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Am i able to look at the authentification type of a wireless client ?-Solution
2020-11-25 07:44:54 - last edited 2020-11-25 08:20:27

Dear @Christian2705,

 

could anyone tell me wether it is possible to show the authentification type like wpa2 or wpa3 of a wireless client in the omada sdn controller ?

 

I don't think so. But you can check the authentication type of the SSID in the Omada SDN Controller.

 

 

The default authentication type of the SSID is WPA2-PSK /AES. Only WiFi6 AP such as EAP660 HD supports WPA3-SAE.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#2
Options
Re:Am i able to look at the authentification type of a wireless client ?
2020-11-25 08:20:17

@Fae Thank you! didnt expected that only the wifi6 access points support WPA3

  0  
  0  
#3
Options