Switch Statistics wrong
Hello everybody,
i have a problem with my switch statistics.
After a uptime of 5 to 7 days the statistics of one switch are wrong.
At every night i get i response that 60 to 100 TB transmitted but that can not be.
After a reboot of the switch, the problem is solved for a few days
Did anyone have the same problem?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Fae Hi Fae,
i updated my switches to the new version 1.0.1. After the update the switches does not display any traffic in the statistics. They are only display 0 Tx and Rx Data (see screenshot below)
The red circle is the time from the update
- Copy Link
- Report Inappropriate Content
I am experiencing the exact same, no stats since the upgrade.
Attempted a full reboot this morning, did not help
- Copy Link
- Report Inappropriate Content
Hello,
the problem still occours with Omada 4.3.5 and TL-SG2210MP (1.0.1 Build 20210604 Rel.36558(Beta)
At my site it occours mainly with a QNAP NAS,
In switch statistic you can see, that packet count is correct, but Bytecount is way to high.
I assume there is a calculating error in the statistics. Seems that 1Mbyte is shwon as 1TB ?
Client view ist correct.
Here some pictures
is there some progress in determing the origin of the failure
Greatings
- Copy Link
- Report Inappropriate Content
Hello, i installed Firmware 1.0.2 on TL-SG2210MP yesterday. And for the moment it seems that the statistics are working correct now.
Greatings
- Copy Link
- Report Inappropriate Content
Hello,
happy to early :-(
After about 4 to 7 days the problem reoccours. After rebooting the switch it works for 4 to 7 days and then you have do reboot again.
I hope TP-Link will improve that in an upcoming firmware.
- Copy Link
- Report Inappropriate Content
Hello all,
I also experience the same behaviour.
I've only one switch connected to Omada Controller. For the EAPs the Traffic Activities are fine. Omada Controller Version is 4.4.6.
- Copy Link
- Report Inappropriate Content
@KOp i have the same problem. After Update the switches to 1.1.2 it worked for one day and now the statistics are wrong.
if you look in the insights --> switch status --> connected you can see that the stats of switch switch right but the oamda dashboard doensent display that right
insights statistics:
- Copy Link
- Report Inappropriate Content
I have this problem as well.
Firmware is current on my switches and I'm running v4.4.6 of the controller. I have a small network with light trafffic and the dashboard widget for switch activity is WAY off.
Over a six day period it states that one switch has tramsitted 369.26TB and the other has transmitted 338.19TB. I watch Netflix, YouTube and have a couple Alexa devices.
The device page for the switches shows accurate data:
Someone needs to look at the code on that widget and fix it. I just use this for informative purposes on my tiny network. I would hate to be someone that actually needs this data to be accurate.
Sincerly
Paladin Support
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 5896
Replies: 28
Voters 0
No one has voted for it yet.