Business Community > Controllers > TL-ER7206 is not adopting
< Controllers

TL-ER7206 is not adopting

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

TL-ER7206 is not adopting

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-ER7206 is not adopting
TL-ER7206 is not adopting
2021-01-13 21:38:47 - last edited 2021-01-18 10:09:48
Model: ER7206 (TL-ER7206)  
Hardware Version: V1
Firmware Version: Firmware Version: 1.0.0 Build 20201105 Rel.77675 Hardware Version: TL-ER7206 v1.0

I have a new TL-ER7206 and it is not adopting via the Omada controller (OC200) and not via the Cloud Controller. I have already several SG2210 switches and several EAP245v3 running and managed via de OC200.

 

What have I done, made a direct connection between laptop and TL-ER7206 (192.168.0.1), login and made an IP-adress change to 192.168.2.250 (manual Configuring the Static IP Choose the menu Network > WAN > WAN to load the following page. Figure 2-3 Configuring the Static IP) and saved and logout. Break down the direct connection and made a connection between switch SG2210 and the TL-ER7206. Then I started Omada controller, in devices the TL-ER7206 is shown and also the option for adoption. I confirmed adoption; the process starts and after a few minutes the message is agian "adpoting" and het IP-adress is changed to 192.168.0.1.

 

I connect the TL-ER7206 behind the switch just for at first try to configure the settings

 

What do I wrong?

  0      
 
  0      
 
#1
Options
15 Reply
Re:TL-ER7206 is not adopting
2021-01-13 23:26:19 - last edited 2021-01-18 10:09:48

@BartD. 

 

Congrats on the newest router. Where did you purchase it? TP-Link just replied me this afternoon it would be launched earlier March.

 

Maybe you can reference to this guide to adopt it by your OC200. Let us know if it helps.

 

【FAQs Released】How to add an Omada Gateway to the network? - Business Community (tp-link.com)

  0  
  0  
#2
Options
Re:TL-ER7206 is not adopting
2021-01-14 06:51:18 - last edited 2021-01-18 10:09:48

@mma678 

 

I have bouht it in the Netherlands routershop.nl

 

I use the OC200, within that environment it is not adopting. Just the fallback to the original IP settings :-(

  0  
  0  
#3
Options
Re:TL-ER7206 is not adopting
2021-01-18 10:20:52

Dear @BartD.

 

I have a new TL-ER7206 and it is not adopting via the Omada controller (OC200) and not via the Cloud Controller. 

 

Kind note: The Cloud Controller is still developing, not available for the moment.

 

What have I done, made a direct connection between laptop and TL-ER7206 (192.168.0.1), login and made an IP-adress change to 192.168.2.250 (manual Configuring the Static IP Choose the menu Network > WAN > WAN to load the following page. Figure 2-3 Configuring the Static IP) and saved and logout. Break down the direct connection and made a connection between switch SG2210 and the TL-ER7206. Then I started Omada controller, in devices the TL-ER7206 is shown and also the option for adoption. I confirmed adoption; the process starts and after a few minutes the message is agian "adpoting" and het IP-adress is changed to 192.168.0.1.

 

Trying to know whether you successfully adopt the TL-ER7210 router at the end. Is the following FAQ helpful for your situation?

 

【FAQs Released】How to add an Omada Gateway to the network?

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#4
Options
Re:TL-ER7206 is not adopting
2021-01-19 07:58:17

@Fae 

 

Hello Fae,

 

Finally I made it, the TL-ER7206 is adpoted in the Omada controller software in a system setup Router ISP -- TL-ER7206 -- Managed PoE switches --> EAP / laptops / computers / IoT.

 

For the time being I'm fine and the network is running, I have to due to the Covid-19 (working at home and digital education for the childern).

 

Next step (over a couple of weeks / motnhs) is to skip the Router ISP.

 

Thanks,

Bart

  0  
  0  
#5
Options
Re:TL-ER7206 is not adopting
2021-01-19 09:40:48 - last edited 2021-01-19 09:41:10

@BartD. 

 

Dear Fae,

 

As described, the router TL-ER7206 is adopted in the OC200 Controller. It is visible in the "Map" 

But not visible in dashboard. I have try it several time (log on an log off from the Controller). Text continues below picture.

If I press "Gateway" and activate "Speed test" the connection is visible for this session. Is that a bug? Or what should I do to see the Router always as part of the structure?

 

Best Regards,

Bart

  0  
  0  
#6
Options
Re:TL-ER7206 is not adopting
2021-01-19 10:09:34 - last edited 2021-01-19 10:10:24

just interesting if its possible to use GPON ONT sfp adapter to use with SFP WAN on this router to avoid Internet provider converter ?  Any performance testing with this router, would be nice to see if its capable for true 1Gbps :)

  1  
  1  
#7
Options
Re:TL-ER7206 is not adopting
2021-01-19 10:25:57

@Egis 

 

I'm using LAN from ISP. for this moment they are not willing to give direct access to fiber access :-( 

  0  
  0  
#8
Options
Re:TL-ER7206 is not adopting
2021-01-19 10:35:06
maybe have a chance to test max speed if provider gives 1Gbps :)
  0  
  0  
#9
Options
Re:TL-ER7206 is not adopting
2021-01-19 11:48:36

@BartD. 

 

I have no connection with 1 Gbps, just 100Mbps for this moment.

  0  
  0  
#10
Options
Re:TL-ER7206 is not adopting
2021-01-19 13:56:32
anyway it would possible to check with iperf3 if you had a spare computer which could host iperf3 server ;) Two computers and in between ER7206.
  0  
  0  
#11
Options
12

Information

Helpful: 0

Views: 7178

Replies: 15

Related Articles
TL-ER7206 Adopting -> PROVISIONING never ends
971 0
 Router TL-ER7206 not adopting
1398 0
 problems adopting a ER7206
3524 0
 Adopting TL-ER7206 to an 192.168.68.x network
2072 0
Open wan ports TL-ER7206
970 0
ER7206 Trunk Vlan with TL-SG108E
1705 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.