[add feature] cant set static IP outside the DHCP range for clients

[add feature] cant set static IP outside the DHCP range for clients
[add feature] cant set static IP outside the DHCP range for clients
2021-03-09 05:53:36 - last edited 2022-01-12 00:39:05
Hardware Version: V1
Firmware Version: 1.0.1

using omada controller 4.2.11 and a tl-r605
I have servers, and some devices that need to be static ip.
I would like to set a static IP to my clients within [192.168.2.1-99] outside the dhcp range of [192.168.2.100-254] but it would not let me do it directly
there is a way to do it but it takes too much time just changing the DHCP range again and again
hope this feature is added

 

7
7
#1
Options
1 Accepted Solution
Re:[add feature] cant set static IP outside the DHCP range for clients-Solution
2022-01-05 00:01:07 - last edited 2022-01-12 00:39:05

Seems like controller version 5.x has introduced the possibility to assigne an ip outside of the DHCP range.

 

Here is the release note from the latest OC200 Firmware that includes Controller v5.0.29 : https://static.tp-link.com/upload/firmware/2021/202112/20211224/Release%20Note_OC200_v5.0.29.pdf

Recommended Solution
3
3
#11
Options
9 Reply
Re:[add feature] cant set static IP outside the DHCP range for clients
2021-03-09 22:53:50 - last edited 2021-03-25 07:52:36

@langamer101 What you actually do in this situation is make a DHCP. reservation, you are not configuring a static IP on the host/device.

0
0
#2
Options
Re:[add feature] cant set static IP outside the DHCP range for clients
2021-03-10 02:17:15 - last edited 2022-01-13 02:18:51

Dear @langamer101,

 

I would like to set a static IP to my clients within [192.168.2.1-99] outside the dhcp range of [192.168.2.100-254] but it would not let me do it directly
there is a way to do it but it takes too much time just changing the DHCP range again and again
hope this feature is added

 

Thank you for your valued feedback. This has been forwarded as a feature request to the product team for further evaluation.

 

Update: This (set static IP outside the DHCP range) has been added on Omada Controller v5.0 and above.

New to the TP-Link Community? Getting Started from this thread: https://community.tp-link.com/en/business/forum/topic/551684
1
1
#3
Options
Re:[add feature] cant set static IP outside the DHCP range for clients
2021-05-29 10:30:38

I want to support this request. It would be very convenient to be able to reserve IPs outside the DHCP range. Unify already does this, so I'm sure Omada can do it too ;-)

0
0
#4
Options
Re:[add feature] cant set static IP outside the DHCP range for clients
2021-08-02 23:13:55
I need to set a static IP outside the DHCP range as well, i´ll have to config my ER605 as standalone meanwhile this is fixed, i want to use omada, but it is indispensable for me to organize my servers this way. Hope this is considered in the next upgrade
0
0
#5
Options
Re:[add feature] cant set static IP outside the DHCP range for clients
2021-08-02 23:17:44

@jcouzy How can i do that?

0
0
#7
Options
Re:[add feature] cant set static IP outside the DHCP range for clients
2021-08-10 10:04:08

Unfortunately, I can't help you with your problem, because I have almost the same one.

0
0
#8
Options
Re:[add feature] cant set static IP outside the DHCP range for clients
2021-08-17 07:34:13

+1 to this request.

 

I like to arrange my network with static leases in one range and dynamic leases offset in a separate range so they can't occupy the IP of a known device if it is briefly offline.

0
0
#9
Options
Re:[add feature] cant set static IP outside the DHCP range for clients
2021-11-23 12:34:29

@langamer101 I'm having the same issue as well, the only way I have found around it is to temporarily adjust your DHCP range to include the address you want then readjust after setting the static ip you want on the device

0
0
#10
Options
Re:[add feature] cant set static IP outside the DHCP range for clients-Solution
2022-01-05 00:01:07 - last edited 2022-01-12 00:39:05

Seems like controller version 5.x has introduced the possibility to assigne an ip outside of the DHCP range.

 

Here is the release note from the latest OC200 Firmware that includes Controller v5.0.29 : https://static.tp-link.com/upload/firmware/2021/202112/20211224/Release%20Note_OC200_v5.0.29.pdf

Recommended Solution
3
3
#11
Options