Poor Range as a Hotspot

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Poor Range as a Hotspot

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Poor Range as a Hotspot
Poor Range as a Hotspot
2021-03-28 11:21:23
Model: EAP110-Outdoor  
Hardware Version: V4
Firmware Version: 5.0

Tested and installed on our rooftop maybe 8 meters from the ground. But in an open space about 30meters away from the Hotspot i've got disconnected. In the net it's saying max 200meter range. Tx set to max (22). What else do i need to adjust? Does cat5 lan cable affected the setup?

 

Badly needed your advise. Im trying to have a hotspot business here in my village. Thanks

  0      
  0      
#1
Options
1 Reply
Re:Poor Range as a Hotspot
2021-03-29 23:05:31

@MrELX 

 

The CAT5 cable likely isnt the issue

 

I would start looking at channels and channel width.   Try using 20mhz on channel   1      6   or  11 and test, change channel and re-test.  

 

Once you get a good channel try up to 40mhz width

 

Welcome to 2.4Ghz congestion :)

 

 

  0  
  0  
#2
Options