Portal authentication doesnt work
Hi mates,
after today's upgrade firmware of Router TL-R605 which solves our hands, exists a problem for many days. Here is my topology
As you can see SDN Router (TL-R605) is behind NAT device/ISP Modem.
Here is my Configuration
When I am logging into wi-fi (omada2) is displayed neither some internet page nor this page:
Why happened this?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I finally do it. I apply port forwarding 80 and 443 on the side which controller belongs (Building A). First in the ISP Modem with the destination IP the WAN IP of SDN Router and then in controller (https://omada.tplinkcloud.com/) with destination IP the IP of omada hardware controller.
- Copy Link
- Report Inappropriate Content
It is only on remote site or same sita as the OC200?
If it only on remote site you have to port nat port TCP 8088 and 8843 to OC200
you have to do a nat on isp router and same nat in ER605.
I guess you have adopted device in site 2 with wan adress on site 1
/shberge
- Copy Link
- Report Inappropriate Content
I apply port forward on both sites (Building A nd B) and both devices (ISP Modem and SDN Router) and doesnt work
- Copy Link
- Report Inappropriate Content
When I apply portal euthentication on SSID omada2 (which is on Building B) and after that I log on a page, the URL is public of building A:8088
According to this link https://community.tp-link.com/en/business/kb/detail/362 the correct ports is 80 and 443
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I change the HTTP Port for portal to 80 instead of 8088 and nothing happen. Also I have to mention that I apply port forwarding the ports 80 443 on ISP Modem. I dont apply port forwarding the ports 8088 and still appear on URL public_IP_Bulding_A:8088 when I try to log on wifi via SSID with omada2 which exits in building B
- Copy Link
- Report Inappropriate Content
I finally do it. I apply port forwarding 80 and 443 on the side which controller belongs (Building A). First in the ISP Modem with the destination IP the WAN IP of SDN Router and then in controller (https://omada.tplinkcloud.com/) with destination IP the IP of omada hardware controller.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1142
Replies: 6
Voters 0
No one has voted for it yet.