OC 200 - Anti Lag or Gaming priority
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.OC 200 - Anti Lag or Gaming priority
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello, i have a concern or request. It is possible to add features in OC 200 controller the anti-lag or gaming priority? I notice that ping is not stable..
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
what is your ping reading?
To be honest, the OC200 is a controller and ultimately WiFi will experience MUCH more lag than a cable ever will due to the nature of the network medium the data is transversing. This is not something that can be corrected or adjusted via a setting, any router that offers "gaming enhanced" or "anti lag" is really just marketing buzz words. The best a setting could do it enable jumbo frames or reduce guard times.. might shave off 1-2 ms ping, tbh all you can really do is move closer to the AP.
However, if your lag is being caused by a congested WAN link, you could consider having a separate VLAN or SSID for your gaming and apply bandwidth controls to the nongaming network. This could free up resources and help things.
- Copy Link
- Report Inappropriate Content
@Yhanzkhie- Copy Link
- Report Inappropriate Content
@Philbert May I asked what is the recommended height of pole for the installation of EAP225 outdoor antenna? I have a 18 meters pole installed but when i connected to the AP for about 100 meters the signal is strong but there is no internet connection, but when i move closer to AP I can surf the net without any problem. I know this question is out of topic but, if you can give me any tips it will be much appreciated. Thanks.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
100% agree with Somnus
We get this issue reported quite often and as mentioned YES the AP may be able to send it over 200m, there is little to no chance a mobile / laptop etc would be able to return the signal that distance.
From experience you are looking at around 60 to 70m of usable distance. If you need to have WiFi at 100m you should look to repeating that signal via use of a mesh node (another 225 outdoor for example) or creating a point to point connection
Sadly the height of your post wont help with this one, its a Rx signal issue.
- Copy Link
- Report Inappropriate Content
In the screenshot you provided, are you pinging the Controller?
I notice the 1ms pings are common so this is a LAN connection, however the odd spike over 100 is usually a result of a Router in place and not a switch. Are you connected to a ISP router?
- Copy Link
- Report Inappropriate Content
@Somnus Thank you.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
thanks to provide this information. I'm also facing the same issue with working.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2392
Replies: 13
Voters 0
No one has voted for it yet.