OMADA Software Controller
Howdy,
I'm using OMADA software controller in some scenarios, to save me time.
In the device list, i had once a notify to upgrade the AP's, but i don't see how to make the controller show me the option to check make the omada controller check for firmware for the AP's.
What can I do?
You can check in the below image, the upgrade FW option used to appear on the right, on the "action" column,
Thanks in advanced,
Jorge
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Dear @JorgeBastos,
JorgeBastos wrote
In the device list, i had once a notify to upgrade the AP's, but i don't see how to make the controller show me the option to check make the omada controller check for firmware for the AP's. What can I do?
You can check in the below image, the upgrade FW option used to appear on the right, on the "action" column,
Check the image below:
- Copy Link
- Report Inappropriate Content
@Fae Hi,
Well, I've seen that, but it said i have to enable clould access, and I don't want that.
I'm sure this was working in previous versions of the OMADA software controller.
But now in 4.3.5 it ask's me to enable the cloud access.
How can this be done without cloud access, like it as working before?
Please let me know ASAP,
Thanks in advanced,
- Copy Link
- Report Inappropriate Content
Dear @JorgeBastos,
JorgeBastos wrote
Well, I've seen that, but it said i have to enable clould access, and I don't want that.
I'm sure this was working in previous versions of the OMADA software controller.
But now in 4.3.5 it ask's me to enable the cloud access.
How can this be done without cloud access, like it as working before?
Please let me know ASAP,
I'm afraid that the Omada Controller v4.x doesn't support checking for the firmware update without cloud access enabled.
May I know the reason why you don't want to use cloud access?
- Copy Link
- Report Inappropriate Content
Hi,
Oh I see, but that doesn't make any sense...
No way to put back that feature with an workarround or so?
There's no reason why I should have cloud access, no point in that and it's useless.
Let me know ASAP.
- Copy Link
- Report Inappropriate Content
Hi, you can tap the device, go to config>manage device, and upload the latest firmware manually.
Here is the firmware file download link, and make sure you are using the local Controller.
https://www.tp-link.com/en/support/download/
- Copy Link
- Report Inappropriate Content
Hi,
Ok, but I'd like to do it all by once, like before.
No other way?
- Copy Link
- Report Inappropriate Content
I don't like cloud access either, but I just enable the cloud access every few weeks to do a firmware check, then disable after the firmware check is complete.
I did find that the app on my phone sometimes found the updated firmware even when cloud access was disabled, but YMMV
- Copy Link
- Report Inappropriate Content
@Fae - Answering for myself (but reasons will probably be the same for many):
Because:
There's no good reason an online account is required for this feature.
I don't want my network access dependent on anything more than it already is. (Hardware, software configuration, ISP).
I don't want Yet Another Online Account to manage.
And lastly, Online Security is incredibly difficult to do right, and fragile. I don't trust TP-Link to implement everything well, and even if you do everything "perfectly", you can still be compromised. (See: Solar Winds)
Example:
- 2FA is still not available for Omada Cloud!
- Same wildcard cert is used for Omada Cloud page as for the home camera login. Heck, there's a wildcard cert for this forum, which is the official method/location to manually download firmware. Is the firmware signed? When updates are found is the cert chain strictly checked? Is there a hash that is verified before an update is installed? Etc)
- Copy Link
- Report Inappropriate Content
Hi,
Valid for you, not for me.
Why should I want an online account, when I have access to the remote devices, filtered by IP/public IP?
- Copy Link
- Report Inappropriate Content
@JorgeBastos Wot? I think you misunderstood what I wrote? (Though I'm not sure how)
JorgeBastos wrote
Hi,
Valid for you, not for me.
Why should I want an online account, when I have access to the remote devices, filtered by IP/public IP?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1885
Replies: 10
Voters 0
No one has voted for it yet.