problems adopting a ER7206
Hello!
I've got a ER7206, a switch and some APs all connected to an oc300, but today the router "disconnected" and i failed re-adopting.
its just disconnected and done after 2 tries.
resetting, new firmware, forgetting all wont help.
after the faild attempts it says ->
Note: This Gateway is being managed by Omada Controller 192.168.0.3
but its not. i cant login to it until i hard reset the device.
without adopting it works just fine. but...
any tips?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
You can try to reboot both the OC300 and ER7206, after power off these two devices, wait for 2 minutes and power back on. Then try to login the Controller to adopt the ER7206.
If still cannot work, can your share what is the firmware version of the router and the controller version of OC300?
- Copy Link
- Report Inappropriate Content
i will try waiting sometime.
"sadly" i already deployed 2 offsite routers and some aps that are also connected to the controller, so i am more or less limited to night times for testing.
Controller Version:4.3.5
Model:OC300 1.0
Firmware Version:1.1.0 Build 20210406 Rel.58776
i am already on the beta firmware i found on the forums.
Hardware Version:
TL-ER7206 v1.0
Firmware Version:
1.1.0 Build 20210531 Rel.64940
- Copy Link
- Report Inappropriate Content
i tried the 10min without power thing, didn't work.
now one of my offsite ER605's wont adopt anymore too.
so i dont know.
- Copy Link
- Report Inappropriate Content
Try to use the Username and Password on the "Setting-Site-Device Account" to manually adopt the ER7206.
Did the devices in the network all belong to subnet 192.168.0.x? Or maybe you can try to downgrade the firmware of ER7206 back to 1.0.1
- Copy Link
- Report Inappropriate Content
the manual adopting thing i did aswell. about 8 times with different firmwares.
i will try the downgrading next.
- Copy Link
- Report Inappropriate Content
Dear @drgonzoo,
drgonzoo wrote
the manual adopting thing i did aswell. about 8 times with different firmwares.
i will try the downgrading next.
Sorry to bother you on this, but I'm wondering whether the adopting issue was resolved finally?
If you still have trouble, I'd like to escalate your case to the TP-Link support team who could help you more efficiently.
If the issue is addressed or resolved, I'd encourage you to share it with the community.
Thank you so much for your cooperation and support. Looking forward to your reply!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3489
Replies: 6
Voters 0
No one has voted for it yet.