Business Community > Omada Cloud SDN > how can i change lan to another lan?
< Omada Cloud SDN

how can i change lan to another lan?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

how can i change lan to another lan?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
how can i change lan to another lan?
how can i change lan to another lan?
2021-12-20 08:25:22
Model: OC200  
Hardware Version: V1
Firmware Version: 1.9.3 rel 39903

I have 2 LANs settings in my wired networks

One named LAN(default), the other named LAN_1

In settings, Client > Device to change LAN > Config > Use Fixed IP Adress enable, and select network LAN_1. (with Static IP Adress too.)

 

and reboot Device, there is no change.

 

I'm using OC200 with ER7206 and unmanaged switch SG1008MP.

 

what can i do for change lan settings?

  0      
 
  0      
 
#1
Options
4 Reply
Re:how can i change lan to another lan?
2021-12-20 09:31:21

@jhyoo 

 

I think I can picture what you are referring too.. basically on your OC200 you have created a 2nd LAN and when you apply this it doesnt take effect?

 

Can you post a screenshot or two of what you are trying to achieve.?     My gut feeling is that you are trying to setup different LAN segments (VLANs) but your switch isn't managed so that wont be possible sadly.

 

If you can post some screens we will know more

 

  0  
  0  
#2
Options
Re:how can i change lan to another lan?
2021-12-20 11:40:42

@Philbert 

 

I want to change VLAN in IoT devices.

 

Wireless IoT devices uses LAN_IoT with vlan settings in EAP, but wired devices can't.

 

Example device is NVR

 

 

setting LAN in settings > Wired Networks > LAN

 

change NVR's Config like this figs, but it didn't work for me.

Reboot NVR, Reconfigure NVR, changing port didn't work for me. 

  0  
  0  
#3
Options
Re:how can i change lan to another lan?
2021-12-21 08:38:16

Dear @jhyoo ,

 

jhyoo wrote

@Philbert 

I want to change VLAN in IoT devices.

Wireless IoT devices uses LAN_IoT with vlan settings in EAP, but wired devices can't.

Example device is NVR

change NVR's Config like this figs, but it didn't work for me.

Reboot NVR, Reconfigure NVR, changing port didn't work for me. 

 

Actually it doesn't support to set the Multi-nets Network only with the SDN gateway on the controller currently.

It suggests that you can choose to use the ER7206 in standalone mode to achieve your needs or you can get another SDB switch managed by controller, too.

You can consult this article: How to configure Multi-Networks & Multi-SSIDs on Omada SDN Controller

Or How to create multi networks .

 

Best Regards!

Best Regards! :) New to TP-Link Community? >>Get Started Here<<.
  0  
  0  
#4
Options
Re:how can i change lan to another lan?
2022-02-03 11:51:03

@Hank21 Hello Hank21!

I bought new switch SG3428XMP.

now i can broadcast IoT SSID using VLAN "LAN_IoT ". but it's not work. so sad

VLAN LAN_IoT (VLAN ID : 10)

 

i configured IoT SSID like this capture image.

 

And AP settings.

 

 

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 368

Replies: 4

Related Articles
Unable to block traffic between VLANs on ER7206
1439 0
About Us
Press
Copyright © TP-Link Corporation Limited. All rights reserved.