how can i change lan to another lan?
I have 2 LANs settings in my wired networks
One named LAN(default), the other named LAN_1
In settings, Client > Device to change LAN > Config > Use Fixed IP Adress enable, and select network LAN_1. (with Static IP Adress too.)
and reboot Device, there is no change.
I'm using OC200 with ER7206 and unmanaged switch SG1008MP.
what can i do for change lan settings?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I think I can picture what you are referring too.. basically on your OC200 you have created a 2nd LAN and when you apply this it doesnt take effect?
Can you post a screenshot or two of what you are trying to achieve.? My gut feeling is that you are trying to setup different LAN segments (VLANs) but your switch isn't managed so that wont be possible sadly.
If you can post some screens we will know more
- Copy Link
- Report Inappropriate Content
I want to change VLAN in IoT devices.
Wireless IoT devices uses LAN_IoT with vlan settings in EAP, but wired devices can't.
Example device is NVR
setting LAN in settings > Wired Networks > LAN
change NVR's Config like this figs, but it didn't work for me.
Reboot NVR, Reconfigure NVR, changing port didn't work for me.
- Copy Link
- Report Inappropriate Content
Dear @jhyoo ,
jhyoo wrote
I want to change VLAN in IoT devices.
Wireless IoT devices uses LAN_IoT with vlan settings in EAP, but wired devices can't.
Example device is NVR
change NVR's Config like this figs, but it didn't work for me.
Reboot NVR, Reconfigure NVR, changing port didn't work for me.
Actually it doesn't support to set the Multi-nets Network only with the SDN gateway on the controller currently.
It suggests that you can choose to use the ER7206 in standalone mode to achieve your needs or you can get another SDB switch managed by controller, too.
You can consult this article: How to configure Multi-Networks & Multi-SSIDs on Omada SDN Controller
Or How to create multi networks .
Best Regards!
- Copy Link
- Report Inappropriate Content
@Hank21 Hello Hank21!
I bought new switch SG3428XMP.
now i can broadcast IoT SSID using VLAN "LAN_IoT ". but it's not work. so sad
VLAN LAN_IoT (VLAN ID : 10)
i configured IoT SSID like this capture image.
And AP settings.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 724
Replies: 4
Voters 0
No one has voted for it yet.