EAP660HD Unable to Wireless MESH with another 660HD

EAP660HD Unable to Wireless MESH with another 660HD
EAP660HD Unable to Wireless MESH with another 660HD
2022-01-28 20:44:45
Model: EAP660 HD  
Hardware Version: V1
Firmware Version: 1.1.0

I have 2x EAP660HD, 2x EAP225-OD, and OC-200.  

 

Typically, my 660's are ethernet connected, and my EAP225-OD's are MESH (wirelessly) uplinked.  This works great since the 1.1.0 firmware for the 660's (like it used to with my prior EAP245V3's).

 

But, sometimes the Ethernet connection for one of my 660's cuts out (MOCA bridged connection).  My older EAP245's used to UPLINK wirelessly when this occurred to the other AP which was still hardwired.

 

But when this occurs now, my isolated EAP660HD doesn't seem to be able to be wirelessly linked to the remaining, hardwired EAP660HD.  Rather it goes through the repeated and very annoying cycles of being disconnected, then isolated, then disconnected, then isolated.

 

At least my client STA's have all migrated automatically to the EAP that's still connected.

 

Will this be fixed in a future firmware version?

 

Thank you!

Jonathan

  0      
  0      
#1
Options
1 Reply
Re:EAP660HD Unable to Wireless MESH with another 660HD
2022-06-03 08:25:50

  @JSchnee21 

Do you resolve this issue? I have same problem on 660. it wont mesh with other 225. latest firmware and setup is right. 

  0  
  0  
#2
Options