LAN access not going both ways

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

LAN access not going both ways

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

oldy

LV1

2022-02-02 10:21:43 - last edited 2022-02-17 11:13:47

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2022-02-02

LAN access not going both ways

2022-02-02 10:21:43 - last edited 2022-02-17 11:13:47

Model: Archer AX6000

Hardware Version: V1

Firmware Version: 1.2.4

Please see the Google Slide.

https://docs.google.com/presentation/d/1jZTrRpahSTk8asZZRkpUd9KGfZVCHJUCWfbWWJyqxyc/edit#slide=id.g11169ea5760_0_42

My Mac (192.168.0.0 / 24 subnet) can see machines on 192.168.1.0 / 24 subnet but the opposite direction does not work.
My PC (192.168.1.0 / 24 subnet) can not access any machines in 192.168.0.1 subnet.

I know if I set the AX6000 to bridge mode, everything is on the same subnet but that's not what I want.
I want to use the AX6000 to be in router mode for security reasons.

Thank you.

1 Accepted Solution

terziyski

LV7

2022-02-02 18:23:23 - last edited 2022-02-17 11:13:47

Posts: 6198

Helpful: 4353

Solutions: 900

Stories: 7

Registered: 2013-10-12

Re:LAN access not going both ways-Solution

2022-02-02 18:23:23 - last edited 2022-02-17 11:13:47

@oldy

For this to work you really need AX6000 set in AP mode - Case 1.

Thus both routers would be in the same subnet (192.168.1.0/24) hence you'll be able to communicate in both ways.

The way you're trying won't work when using AX6000 in router mode (default).

Devices in 192.168.0.0/24 are not visible from 192.168.1.0/24 because of the second NAT introduced in AX6000.

You could set a DMZ in the AX6000 to your MAC LAN IP address.

You could also set (in ISP router) a static route for 192.168.0.0/24 on its LAN interface with GW 192.168.1.125.

That would help for accessing particular services running on your MAC computer (pings, remote access, web services, etc.) from your PC.

If you want to benefit from file sharing between PC and MAC then AX6000 in AP mode is the only way to go.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".

Recommended Solution

2 Reply