No internet when assigning VLAN to Wireless Network
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
I am trying to setup 4 networks all with their own VLANs. I have created the VLANs and created the seperate wireless SSIDs. When I apply the vLAN in the wireless setup the networks work fine except for my base network. When I put that SSID into a VLAN it loses internet connectivity. Stare and compare does not reveal anything I may have done wrong between the other SSIDs and VLANs so not sure why this is occuring.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hey
Would you be able to provide any more details on your setup? Are you using the full Omada system or have you other vendors hardware also? How have you setup the vlans?
Any more info you can provide would help as this is not a common issue that we come accross
- Copy Link
- Report Inappropriate Content
Yes setup is as follows
ER605 router
2 TL-SG2008P switches
OC 200
EAP 245,225,615 Wall and 235 Wall
Networks are
192.168.1.1/24 Vlan 10
192.168.2.1/24 Vlan 20
192.168.3.1/24 Vlan 30
192.168.4.1/24 Vlan 40
The problem is with the Vlan 10 network on the originall SSID. The others are IOT, Kids, and Guest
- Copy Link
- Report Inappropriate Content
Dear @ecetta ,
ecetta wrote
Yes setup is as follows
ER605 router
2 TL-SG2008P switches
OC 200
EAP 245,225,615 Wall and 235 Wall
192.168.1.1/24 Vlan 10
192.168.2.1/24 Vlan 20
192.168.3.1/24 Vlan 30
192.168.4.1/24 Vlan 40
The problem is with the Vlan 10 network on the originall SSID. The others are IOT, Kids, and Guest
Can you confirm whether the problem is with all EAPs or with a single EAP?
Please provide us with the specific topology of your network so that we can locate the problem more easily.
May I know the firmware version of EAPs？
Best Regards!
- Copy Link
- Report Inappropriate Content
Setup is ER 605 connected to each of the switches. 2 EAPs per switch with OC 200 connected via the switch
Firmware
EAP 245 5.0.4
EAP 225 5.0.7
EAP 615 1.0.2
EAP 235 3.1.0
- Copy Link
- Report Inappropriate Content
Dear @ecetta ,
ecetta wrote
Setup is ER 605 connected to each of the switches. 2 EAPs per switch with OC 200 connected via the switch
Firmware
EAP 245 5.0.4
EAP 225 5.0.7
EAP 615 1.0.2
EAP 235 3.1.0
Please check whether you set the ports between switch and EAP are all tagged, it is significant.
Did you set the management VLAN?
May I know the specific version of your OC200?
Best Regards!
- Copy Link
- Report Inappropriate Content
OC 200 firmware 5.0.30
I do not believe I have set up the management LAN at all
Ports to the APs have been set with All VLANs
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1276
Replies: 6
Voters 0
No one has voted for it yet.