Huawei P30 VoWiFi always ends call with EAP610

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Huawei P30 VoWiFi always ends call with EAP610

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Huawei P30 VoWiFi always ends call with EAP610
Huawei P30 VoWiFi always ends call with EAP610
2022-04-09 15:31:58

Hello,

I've been using VoWifi with my AVM Fritzbox 5530 for two years now without any problems.

 

Now I have set up an Omada SDN and installed two EAP610 AccessPoints.
Now I have a strange behavior with my Huawei P30 and calls via VoWifi.

If I'm logged into the WLan via the EAP610, a VoWfi conversation works for a few seconds, then the conversation is ended.

The WiFi reception over the EAP610 is a lot stronger than over the Fritzbox 5530, but a VoWIFI conversation over the AEP610 not usable :(

 

Does anything else need to be configured here in the Omada controller?

I don't understand why the VoWiFi calls on the EAP610 all drop off, regardless of whether the smartphone is registered in 2.4 GHz or in 5 GHz?

If I activate the old Fritzbox 5530 again and connect the Huawei P30 via the WiFi of the Fritzbox, everything works wonderfully again.
Does anyone have a solution for me?

Thanks :)

 

  0      
  0      
#1
Options
3 Reply
Re:Huawei P30 VoWiFi always ends call with EAP610
2022-04-11 13:22:22

Dear  @lukass2000 

 

May I know the firmware version of your EAP610? And what is the Controller version. 

 

We did not hear any similiar feedback before. Please try disable Advanced features on Controller--Settings--Site.

 

BTW does this issue influence the Internet access of EAP wifi signal? Like once call dropped also no Internet on the wifi?

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:Huawei P30 VoWiFi always ends call with EAP610
2022-04-11 14:34:02 - last edited 2022-04-11 15:49:32

Hello @Hank21,

 

OC200 v1.0 have Controller Version 5.0.30 Firmware 1.14.3 Build 20220112 Rel.64116

EAP610 v1.0 have Firmware 1.0.3 Build 20210806 Rel. 64734

 

Think in Settings is all disabled, or?




 

Strangely enough, the WiFi itself works without any problems.
I also have a Sonos sound system running and surfed on the laptop, all works without any problems.
I only used 2.4HGz and only 5GHz for testing, so that all devices run on the same Wifi.
Everything works, only the VoWifi phone call is automatically ended after a short time.

 

It looks like the EAP610 is not directly the problem.
I also bought an EAP245.
He has exactly the same problem :(
Very strange?

 

 

 

  0  
  0  
#3
Options
Re:Huawei P30 VoWiFi always ends call with EAP610
2022-04-18 11:06:48

Hello @Hank21 ,

 

Think the Problem is the "Wi-Fi Multimedia (WMM)" setting.
If this is enabled, i have many Problems with Huawei Smartphones and VoWifi.
If i diesable the function, all is working problem-free :)

But when I disable WMM, the clients only use 11g(2.4GHz) and 11a(5GHz).
Is that normal?
Why does no 11ng, 11ac,... work, if WMM is disabled?

 

Thanks :)

 

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 475

Replies: 3