1
Votes

Importing Static IP list from ER605 to OC200 BEFORE Adopting ER605

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
 
1
Votes

Importing Static IP list from ER605 to OC200 BEFORE Adopting ER605

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Importing Static IP list from ER605 to OC200 BEFORE Adopting ER605
Importing Static IP list from ER605 to OC200 BEFORE Adopting ER605
2022-04-23 17:15:48 - last edited 2022-04-24 03:27:52
Model: OC200  
Hardware Version: V1
Firmware Version: 1.14.3

Hi.

 

I wish to import To the OC200 the entire Static IP list (Address Reservation list) from my ER605 BEFORE Adopting it in the OC200 as, otherwise, the statc ips will all be lost and reassigned dynamic IPs from the OC200.

 

I have 50 Static IPs defined, so do not want to enter them manually.

 

Also, will other settings like QOS be imported to the OC200. I ask this as I originally Adopted the ER605 (I reverted it back to standalone) and immediately afterwards, my cisco SPA122 IP Phone had glitchy and choppy audio... and as soon as I reverted the ER605 back to standalone and reloaded the saved backup config to it, all was fine

 

 

#1
Options
4 Reply
Re:Importing Static IP list from ER605 to OC200 BEFORE Adopting ER605
2022-04-24 06:56:31

Hi  @Chrislef 

Chrislef wrote

Hi.

 

I wish to import To the OC200 the entire Static IP list (Address Reservation list) from my ER605 BEFORE Adopting it in the OC200 as, otherwise, the statc ips will all be lost and reassigned dynamic IPs from the OC200.

 

I have 50 Static IPs defined, so do not want to enter them manually.

 

Also, will other settings like QOS be imported to the OC200. I ask this as I originally Adopted the ER605 (I reverted it back to standalone) and immediately afterwards, my cisco SPA122 IP Phone had glitchy and choppy audio... and as soon as I reverted the ER605 back to standalone and reloaded the saved backup config to it, all was fine

 

 

Thank you for you kindly feedback! I will report the requirement to D&R department. 

#2
Options
Re:Importing Static IP list from ER605 to OC200 BEFORE Adopting ER605
2022-05-03 17:38:07

  @Hank21 

I would have liked even the ability to import a text file, say CSV (comma separated values) after adoption.

 

Formatted something like:

 

mac1, IPv4,  (here a ,24 is assumed as /24 is the default)

mac2, IPv4, 22 (/22)

...

 

A simple parser would validate that the IP's entered belong to existing subnets (or flag errors and quit)

A more complex parser could create new LAN subnets on the fly to match anyIPs requested in new ranges.  Name the new subnets LAN1, LAN2, ... they can be renamed by the user late.

<< Paying it forward, one juicy problem at a time... >>
#3
Options
Re:Importing Static IP list from ER605 to OC200 BEFORE Adopting ER605
2022-05-03 19:42:55

So, just to be clear, as of May3, 2022 the importing of the Static list AND other settings already made in the ER605, BEFORE Adopting the ER605 to the OC2000, is simply NOT possible!

 

So, is there a way in the OC200 to assign the addresses quicker than one by one, with each MAC having to be manually entered? ... and before Adopting???

#4
Options
Re:Importing Static IP list from ER605 to OC200 BEFORE Adopting ER605
2022-09-29 23:23:34

Hi,

 

if Dev team is locking into this function why not mplement an Import/Export function on all Busniness Devices for IP MAC binding, DHCP Reservations etc?

br

Alex

#5
Options

Information

Helpful: 1

Views: 361

Replies: 4

Voters 1

voter's avatar