ER605 Ports Won't Open
ER605 Ports Won't Open
Hi,. I' currently having issues forwarding ports. It was working properly, and then I tried adding another port to forward yesterday. That seems to have broken everything cause now none of the ports will open. I have tried removing all of the port forwarding rules and recreating them, but nothing has worked so far.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
We would need some more information on the setup and what is happening to help you woith this.. can you ping the ports remotely?
Also if you are running a ISP router into the ER605 (double nat setup) have you forwarded the ports appropaitely on the ISP router?
- Copy Link
- Report Inappropriate Content
@Philbert Sorry, I am very new to this type of hardware. My ISP provides a cable modem only. Port forwarding was working, but is no longer working after updating the controller software. Reverting back did not fix the issue. Remote pinging is how I know the ports are closed.
- Copy Link
- Report Inappropriate Content
Hey
No worries, OK so its modem only which means its not a double NAT issue... In your setup are you controlling the ER605 in standalone or via a controller (OC200 / Software)?
Any screenshots you have of the forwarding you set might help if you don't mind :)
- Copy Link
- Report Inappropriate Content
Hi, I am controllering it with the Omada software. Here are all of the port forwading rules I have setup.
- Copy Link
- Report Inappropriate Content
Hey
I can see nothing there that would indicate any issues, they all appear to be setup ok.. However I do notice you have different IPs mentioned in a few of them .106 .118 etc is that correct? are these forwards for different PCs?
Can I also ask why you are port forwarding? Are you running a server for these games? If you are only playing the game you don't need to port forward. I too am a gamer and have one one set of ports forwarded, this is to my Valheim server.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Umm this is a strange one, cant think of anything that could be missing and looking at your screenshot the forwards appear to be correct
Take it firmware on the ER605 is at v1.20 and its been rebooted?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Yeah you could try forgetting and re-adopting the ER605...
Can you see any connection attempts / logs on the servers report anything when trying to connect remotely? You should see attempted connections remember this isn't something you can test locally, it needs to have an attempted established connection from the WAN.
As said I have a valheim server running with no issues, screen below for comparison
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2323
Replies: 19
Voters 0
No one has voted for it yet.