Static IP for Internet with OC200

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Static IP for Internet with OC200

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Static IP for Internet with OC200
Static IP for Internet with OC200
2022-05-24 02:14:40
Model: OC200  
Hardware Version:
Firmware Version:

I use the OC200 to manage some EAP 235 and an ER605 router.

My ER605 router is connected to the modem/router provided by the ISP. This ISP modem had a static IP (manageable), and to avoid a Dual NAT problem I configured it in bridge mode.

 

It happens that by changing the modem to bridge mode, I lost the static IP configuration of my internet.

 

With the OC200 + ER605 can I apply this static internet IP on the ER605?

  0      
  0      
#1
Options
1 Reply
Re:Static IP for Internet with OC200
2022-05-24 04:08:41

  @ElTom 

 

Even in bridge mode, the WAN of the ER605 should normally be configured for DHCP.  What IP is assigned when you do this and connect it to the bridged modem/router?

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#2
Options