No Inter-VLAN routing

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

No Inter-VLAN routing

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
No Inter-VLAN routing
No Inter-VLAN routing
2022-06-29 15:12:01 - last edited 2022-07-17 13:17:40
Model: OC200  
Hardware Version: V2
Firmware Version: 2.1.2

Hello,

I built a small TP-Link based network.

All settings are offline, without Internet. There is no connection on the WAN router interfaces.

I setup static IP for all the network equipment, VLAN interfaces with DHCP, switch profiles and have no ACL defined.

By default I have no inter-VLAN routing. For example I cannot access device at IoT from USER.

 

P.S. I'm sorry, but the problem turned out to be in the client laptop. Some third-party software changed the static routing table.

 

  0      
  0      
#1
Options
1 Reply
Re:No Inter-VLAN routing
2022-06-29 18:47:17

  @3user4

What does your Settings->Wired Networks->LAN table look like? Key point being do you have multiple IP subnets attached to unique VLANs and did you implement ACLs?

 

Here's an example:

 

 

 

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#2
Options