Routing between 2 vlans

Routing between 2 vlans

Routing between 2 vlans
Routing between 2 vlans
2022-07-09 19:10:55 - last edited 2022-07-09 20:03:07
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.0.1

Hi,

i have trouble installing a onada network.

I have 2 vlans, one for computers and one for the pbx. computer = vlan 10, ip 192.168.10.0/24, pbx = vlan 20, ip 192.168.20.0/24

 

so far so good. i have one computer and the pbx connected to one tl-sg2428p on vlan 20 and another computers in the vlan 10.

i can open the pbx gui from the computer in the vlan 20, but not from vlan 10. i can ping from vlan 20 to vlan 10, but not from vlan 10 to vlan 20

I checked it from 5 different new pc´s. windows-firewall is off. has anyone a idea where to start searching.

 

Regards

matthias

  0      
  0      
#1
Options
1 Accepted Solution
Re:Routing between 2 vlans-Solution
2022-07-09 20:02:58 - last edited 2022-07-09 20:03:07
Reboot the router helps...
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Routing between 2 vlans-Solution
2022-07-09 20:02:58 - last edited 2022-07-09 20:03:07
Reboot the router helps...
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 107

Replies: 1

Related Articles