Cannot get 160 channel to work on EAP670

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Cannot get 160 channel to work on EAP670

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Cannot get 160 channel to work on EAP670
Cannot get 160 channel to work on EAP670
2022-07-12 18:37:58
Model: EAP670  
Hardware Version: V1
Firmware Version: 1.0.3

I have radios config set to auto, I only get channel width 80. If I manually set it to 160 it will kick me off 5Hz and down to 2.4. Why doesn't 160 work? I did a search for "TP Link 160 channel not working" and there is a lot of people reporting this on various TP link hardware. None of the research I saw provided a fix. 

  0      
  0      
#1
Options
2 Reply
Re:Cannot get 160 channel to work on EAP670
2022-07-12 21:13:41

  @Chad711 

 

Probably because your version in your region (NA I presume) doesn't have enough channels available to do 160Mhz worth of channel bonding.  FWIW I can get 100Mbps symmetric on a 20Mhz channel from my EAP225's....not sure why you need 160Mhz.

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#2
Options
Re:Cannot get 160 channel to work on EAP670
2022-07-13 00:47:04

  @d0ugmac1 

 

I'm in NA. Thanks for the info. I just wanted to make sure I wasn't missing something that could be a easy fix on this new model. I have a 620HD so no need for this new model if it's really not going to provide better speeds/coverage I guess.

  0  
  0  
#3
Options