Business Community > Controllers > How do I replace my faulty ER606 Router with my new ER605 in my existing OC200 control network
< Controllers

How do I replace my faulty ER606 Router with my new ER605 in my existing OC200 control network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How do I replace my faulty ER606 Router with my new ER605 in my existing OC200 control network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How do I replace my faulty ER606 Router with my new ER605 in my existing OC200 control network
How do I replace my faulty ER606 Router with my new ER605 in my existing OC200 control network
2022-07-24 02:04:42
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version:

Community Hello,

Can you say what is the procedure to replace my faulty (dead) ER605 router with my newly purchase/replacement ER605 router?

My existing network is control by the TP-Link OC200 controller – version 5.1.7 and firmware 1.15.2 Build 20220323 Rel.60717.

Thanks in advance for your assistance.

  0      
 
  0      
 
#1
Options
2 Reply
Re:How do I replace my faulty ER606 Router with my new ER605 in my existing OC200 control network
2022-07-24 16:09:08

  @Unwaf 

 

I do not believe you can 'restore' a single router config from Device A (previously managed by Controller) to Device B (new) when managed under SDN (which seems very odd to me).  However, the good news is that most of the config is done within the controller itself and not specific to the router device.  What I mean by that is you should be able to adopt the new factory defaulted router into the SDN site and once the router is provisioned by the controller should map the previously defined WAN, LAN, and other router specific settings. Certainly can't hurt to try.

<< Paying it forward, one juicy problem at a time... >>
  2  
  2  
#2
Options
Re:How do I replace my faulty ER606 Router with my new ER605 in my existing OC200 control network
2022-07-26 19:20:39

  @d0ugmac1 Thanks for the info will do and let you know the out-come.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 468

Replies: 2

About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.