DHCP reservations and display still not working...

DHCP reservations and display still not working...

DHCP reservations and display still not working...
DHCP reservations and display still not working...
2022-07-30 11:29:32 - last edited 2022-07-30 11:30:43
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.0.2 Build 20220727 Rel.51535

Using the latest v2 beta firware still causes issues with incorrect DHCP reservations and confused display in the controller UI.

 

I have a PC called marvin, it has 2 ethernet ports, each with a static reservation, 192.168.100.10 and 192.168.100.11. This is connected to ports 4 & 6 of SW1, but in the network map, one port shows as connected to SW1 and the other directly to the router (which it is not). Also the incorrect IP and port is shown in the client list:

 

 

 

Above you can see marvin and marvin-2. In the DHCP reservations marvin should get the address 192.168.100.10 and marvin-2 192.168.10.11, but they are ther wrong way around, as well as marvin-2 showing as being connected to the Omada Router.

 

@faeSo, as far as I can see, this beta firmware to _fix_ this issue has in fact made things worse than before...

  0      
  0      
#1
Options
4 Reply
Re:DHCP reservations and display still not working...
2022-08-01 04:01:16

Dear @Tescophil,

 

Tescophil wrote

Above you can see marvin and marvin-2. In the DHCP reservations marvin should get the address 192.168.100.10 and marvin-2 192.168.10.11, but they are ther wrong way around, as well as marvin-2 showing as being connected to the Omada Router.

 

@faeSo, as far as I can see, this beta firmware to _fix_ this issue has in fact made things worse than before...

 

Sorry for any trouble caused. May I know the model number and detailed firmware version of the SW1?

2022 TP-Link Wi-Fi 7 Product Launch Event | Watch the Replay at https://www.tp-link.com/us/wifi7/event/.
  0  
  0  
#2
Options
Re:DHCP reservations and display still not working...
2022-08-01 06:27:21

  @Fae 

 

TL-SG2428P v1.0

1.1.2 Build 20210806 Rel.55686

  0  
  0  
#3
Options
Re:DHCP reservations and display still not working...
2022-08-01 07:05:05

  @Tescophil 

 

I can confirm that hardwired device sometime roam from switch to switch and from switch to router.

 

My main switch is TL-SG2428P v1.0 

and this switch is connected directly to TL-SG2428P v1.0 in a star topology

3 stk TL-SG2008P v1.0

1 stk TL-SG2008 v3.0

1 stk TL-SG2210MP v1.0

 

All with current official firmware.

 

In this moment is this device connected to TL-SG2428P but show that device is connected to router

 

this is not new issue, this have always been like that.

 

 

 

 

 

 

  0  
  0  
#4
Options
Re:DHCP reservations and display still not working...
2022-08-01 08:11:45

Dear @Tescophil,

 

To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID is TKID220800666, please check your email box and ensure the support email is well received. Thanks!

2022 TP-Link Wi-Fi 7 Product Launch Event | Watch the Replay at https://www.tp-link.com/us/wifi7/event/.
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 182

Replies: 4

Related Articles