Access via WAN Omada ER605

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Access via WAN Omada ER605

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Access via WAN Omada ER605
Access via WAN Omada ER605
2022-07-30 23:31:38
Model: ER605 (TL-R605)  
Hardware Version: V1
Firmware Version: 1.2.0 Build 20220114 Rel.76871

Hello,

 

I am new to the Omada suite and would ask if someone coul steer me on the right path please.

 

I've installed a ER605 VPN router and have it woirking ok, however I have applied some port forwards under the virtual server and this is where I have run into trouble. I want to access devices on my network via the WAN address using the port forwards "888.888.88.88:6060 as an example (88 example only)". However, it simpley does not work. I cannot even ping the WAN IP. I have even tried setting up a DynDns which sees the IP address ok, but that also cannot be pinged.

 

I hve tried many settings, but am obviously doing something wrong and any advice would be appreciated.

  0      
  0      
#1
Options
2 Reply
Re:Access via WAN Omada ER605
2022-08-01 13:06:30

  @Panda7 

 

If you can not ping through the WAN IP of the router, you need to check whether the WAN IP is a public IP, and whether there is another NAT device in the front of the router.

As for the settings, you can check this:

How to set up Port Forwarding feature on TP-Link SMB Router (new UI)

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:Access via WAN Omada ER605
2022-08-03 08:55:42

  @Virgo 

 

Thanks for the advice. I had also ordered a new HFC connection which had CG Nat enabled. I have now had this changed to a static IP.

  2  
  2  
#3
Options