ER605 VPN server issues on 1.2.1 and 1.2.1 Beta

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605 VPN server issues on 1.2.1 and 1.2.1 Beta

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605 VPN server issues on 1.2.1 and 1.2.1 Beta
ER605 VPN server issues on 1.2.1 and 1.2.1 Beta
2022-08-11 07:58:44
Tags: #VPN
Model: ER605 (TL-R605)  
Hardware Version: V1
Firmware Version: 1.2.1 & 1.2.1 Beta

Im having issues with 1.2.1 stable and the end-of-july Beta on my ER605 v1.6 regarding VPN server functionality

 

I get very intermittent and flaky VPN connectivity to the ER605 from remote devices over both L2TP and PPTP, sometimes they refuse to even see the server is running, and system logs on the ER605 seem to indicate no connection attempts were received. Other times they will connect but there is no traffic over the VPN.  I am using the built in VPN functionality of the ER605, without any DMZ or port redirects active on the router or network.

 

Flashing back to 1.2.0 stable from January resolves this immediately with no changes whatsoever on the remote devices, but i lose the DHCP and Stealth fixes.

 

Note - this did not happen on the very first 1.1.1 beta that had the stealth fix

 

My ER605 is connected directly to my cable modem and is the only routing device on my network. I can easily replicate and resolve this issue without changing any setting by flashing between 1.2.0 and 1.2.1/Beta on the ER605.  I do not need to change any settings on the remote devices to see this behavior change between the firmware versions on my ER605

  1      
  1      
#1
Options
2 Reply
Re:ER605 VPN server issues on 1.2.1 and 1.2.1 Beta
2022-08-12 06:24:56

Dear @GRL ,

 

GRL wrote

Im having issues with 1.2.1 stable and the end-of-july Beta on my ER605 v1.6 regarding VPN server functionality

I get very intermittent and flaky VPN connectivity to the ER605 from remote devices over both L2TP and PPTP, sometimes they refuse to even see the server is running, and system logs on the ER605 seem to indicate no connection attempts were received. Other times they will connect but there is no traffic over the VPN.  I am using the built in VPN functionality of the ER605, without any DMZ or port redirects active on the router or network.

Flashing back to 1.2.0 stable from January resolves this immediately with no changes whatsoever on the remote devices, but i lose the DHCP and Stealth fixes.

Note - this did not happen on the very first 1.1.1 beta that had the stealth fix

 

Thank you so much for taking the time to report the issue to our community!

 

To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. 

 

The ticket ID is TKID220814150, please check your email box and ensure the support email is well received. Thanks!

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:ER605 VPN server issues on 1.2.1 and 1.2.1 Beta
2022-08-17 09:39:45

I would like to thank Wayne at TP-Link technical support. 

We had a lengthy and in-depth remote support session regarding my problem.  He was very knowledgeable and was happy for me to take the time to show him the problem in its various forms.  

 

I will continue to monitor with the changed configuration of my ER605 and let him know, and will be interested to hear back about their internal analysis of the issue.

  1  
  1  
#3
Options