Option 82 command CLI for TL-SG3210

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Option 82 command CLI for TL-SG3210

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Option 82 command CLI for TL-SG3210
Option 82 command CLI for TL-SG3210
2022-08-26 08:17:54
Model: TL-SG3210  
Hardware Version: V3
Firmware Version: 3.0.4 Build 20220707 Rel.55528

Need help to confirm, does this command for Option 82 on JetStream Switch TL-SG3210 already correct or not.

 

TL-SG3210>en
TL-SG3210#conf
TL-SG3210(config)#service dhcp relay

TL-SG3210(config)#vlan 2807
TL-SG3210(config-vlan)#name Internet
TL-SG3210(config-vlan)#exit

 

TL-SG3210(config)#int gi 1/0/9
TL-SG3210(config-if)#switchport general allowed vlan 2,13,2807 tagged
TL-SG3210(config-if)#ip dhcp relay information option
TL-SG3210(config-if)#ip dhcp snooping trust
TL-SG3210(config-if)#exit

 

TL-SG3210(config)#int gi 1/0/3
TL-SG3210(config-if)#switchport general allowed vlan 2807 untagged
TL-SG3210(config-if)#ip dhcp relay information option
TL-SG3210(config-if)#no ip dhcp snooping trust
TL-SG3210(config-if)#ip dhcp relay information circuit-id "08000192698"
TL-SG3210(config-if)#exit

 

i already follow the guidance but still not working.

 

Hope somebody can help for fix this case.

 

Thank You.

  0      
  0      
#1
Options