Mesh to metal bldg - setup look ok?
I have an Omada ER7206 router, OC200 Hardware controller, 24 port POE and EAP620 HD AP. Just got my metal shop building up and need internet inside. Before I buy the additional hardware I wanted to ask if I was making any mistakes.
Plan - Install an EAP225-Outdoor on outside of metal building. Distance to EAP 620 access point in my house is 50ft. Want to mesh connect the 2 AP's.
Drill hole in metal building and run Cat 5e from EAP 225-Outdoor to a POE switch.
Considering TP-Link TL-SG1005P 5 Port unmanaged POE switch.
POE port 1 to Outdoor AP
POE port 2 to In-shop AP (EAP 635 wall)
POE port 3 to Camera mounted on back of shop
House has Main network 192.168.0.X SSID: MAIN
House has CAM network 192.168.50.X (limits cameras from having internet access)
My assumptions:
1) I configure outdoor AP to mesh with house AP. Its a wireless connection only and wont transmit an SSID
2) Indoor AP SSID will be same as house MAIN and will be on 192.168.0.X
3) I can setup the new shop outdoor camera to be on the CAM network subnet 192.168.50.X
Does my hardware setup look ok?
Can I accomoplish this with the TL-SG1005P 5 Port unmanaged POE switch or will I have to upgrade to something like the TP-Link TL-SG2008P | Jetstream 8 Port Gigabit Smart Managed PoE Switch?
Thank you for any input!