Er605 Adopting

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Er605 Adopting

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Er605 Adopting
Er605 Adopting
2022-10-28 08:16:52
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.0.1

Hi All,

 

I have a omada server in a data centre hosted by Hubox and I've provisioned a ER605 router to the controller over the internet and it worked perfectly .The router is configured with a 4G USB modem as backup and the WAN port as prime PPPOE.

 

When the router was adopted to the controller over the internet I used the 4g internet connect as the PPPOE was down, now here is my problem once the PPPOE came back up and working the router failed to connect to the controller and now it in a state of Adopting. Could this be a problem with the routers WAN IP changing? 

  0      
  0      
#1
Options
2 Reply
Re:Er605 Adopting
2022-10-31 05:55:22

  @Drwifi 

 

IP changing could be the problem. But it may also related to the ports.

 

You may need to make sure:

1. The ER605 has correct Controller IP and can Ping to the controller IP through PPPoE WAN IP;

2. Port 29810-29814 has been open on Controller Host side, to allow PPPoE WAN IP to access the controller

  0  
  0  
#2
Options
Re:Er605 Adopting
2022-10-31 09:10:42
Hi Somnus, Yes all ports are open as I have eap's registered also it I remove the PPOE connection and use the usb modem for internet its connects and works fine.
  0  
  0  
#3
Options