Home

Forums

Stories

Knowledge Base

Business Community > Routers > Omada ER605 Client PC IP Address

< Routers

Omada ER605 Client PC IP Address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Omada ER605 Client PC IP Address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Engineer_Cenina

2022-11-01 06:59:46

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2022-11-01

Omada ER605 Client PC IP Address

2022-11-01 06:59:46

Tags: #DHCP Service

Model: ER605 (TL-R605)

Hardware Version: V1

Firmware Version:

I got a network setup:

Issue is, can I set a static IP to the client pcs given by the controller?

For example, if the pc is in DHCP/Dynamic, and it got an IP of 192.168.0.100 , can I set it as static IP in control panel > IPV4 by having config of 192.168.0.100 | 255.255.255.0 |192.168.0.1 |?

It provides internet but the fact that I want my client pcs to have specific ip.

I am worried that omada contoller will change its client pc's ip because it sets to the client pc as auto obtain

Anyone can clarify

2 Reply

Somnus

LV5

2022-11-02 10:46:16

Posts: 1212

Helpful: 219

Solutions: 72

Stories: 0

Registered: 2021-06-14

Re:Omada ER605 Client PC IP Address

2022-11-02 10:46:16

@Engineer_Cenina

If your PC set up static IP on control panel, means your PC is not using DHCP anymore.

The router can only affect the PC using DHCP.

Cebujohn

LV2

2022-12-01 13:48:53

Posts: 29

Helpful: 19

Solutions: 0

Stories: 0

Registered: 2022-10-30

Re:Omada ER605 Client PC IP Address

2022-12-01 13:48:53

Got same issues. I have CCTVs (TAPO c210) connected on my OMADA network with VIGI NVR. The issue is when there is a system reboot/power interuptions, some or all of the cctvs changes IP addresses so the NVR can no longer auto-obtain the device. How can I effectively and forcefully assign IP addresses on my CCTVs so it would not randomly change IPs during reboot? I already tried it in the Omada controller accessing CLIENT settings.

Omada ER605 Client PC IP Address

Omada ER605 Client PC IP Address

Information

Voters 0

Tags