port forwading

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

port forwading

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
port forwading
port forwading
2022-11-02 10:10:55
Model: ER605 (TL-R605)  
Hardware Version:
Firmware Version: 2.0.2

Hi to all, 

ihave replaced my cisco rv16 with er605. 

i have two wan congifured with static ip of two lan, WAN 192.168.1.1 and WAN/LAN1 192.168.2.2 and lan interface 10.0.1.1. 

On the WAN/LAN1 i have a router that forward , from outside to inside the 1194 port with tcp/udp protocol to 192.168.2.2 and it worked fine with cisco, now with er605 i create a virtual server rule to forwad the port 1194 to internal ip , 10.0.1.63, but it dosent work. I cant reach the vpn server from remote location. 

 

how i can debug th forwading ?

  0      
  0      
#1
Options
2 Reply
Re:port forwading
2022-11-02 17:52:53

  @loopin3 

 

This can take a good few mins to apply, sometimes even a reboot of the Router.  

 

Generally it does work eventually but when making changes I tend to reboot to apply them

 

 

  0  
  0  
#2
Options
Re:port forwading
2022-11-03 07:48:21

  @loopin3

Your ER605 WAN IP is private IP?

 

If so, then port forwarding will not work. You will also need to open port 1194 on the front router, for the ER605 WAN IP 192.168.2.2 .

  0  
  0  
#3
Options