Cannot get new EAP115 to power on

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Cannot get new EAP115 to power on

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Cannot get new EAP115 to power on
Cannot get new EAP115 to power on
2022-11-10 05:12:08
Model: EAP115-Wall  
Hardware Version:
Firmware Version:

Hello gurus, please help a novice?

I got an EAP 115 wall to extend my wireless network to a second story flat on top of the garage. The EAP is connected to my fibre router via cat6 cable and LAN port, but the device will not power on. Am I using the wrong cable? Is there some other power source needed?

  0      
  0      
#1
Options
2 Reply
Re:Cannot get new EAP115 to power on
2022-11-10 07:51:13

  @Joxx 

please follow the instruction: https://static.tp-link.com/manual/2021/202107/20210722/7106509292_EAP%20Series__IG.pdf

this thing uses poe. you need the poe injector to get power and internet for the eap

ScReW yOu gUyS. I aM GOinG hoMe. —————————————————————— For heaven's sake, can you write and describe your issue based on plain fact, common logic and a methodologic approach? Appreciate it.
  0  
  0  
#2
Options
Re:Cannot get new EAP115 to power on
2022-11-10 13:45:34

  @Joxx based off the link you provided, this is what the back of your EAP115 Wall looks like. Your router / switch needs to be a POE switch compatable with the specs shown in the image. If your switch is not a POE Switch or if it is and does not support the PSE spec listed, then the EAP will not power.

 

 

  0  
  0  
#3
Options