ER605 v2 Firmware update 2.1.0 causes adopting loop
In Omada (Software Controller on my NAS) I did get an notification of an firmware update (2.1.0 Build 20221230 Rel.55248). After installing the firmware the controller says "adopting", "configuring" and "connected" in a loop about every 2 minutes. The list of clients is empty. Information about the ports is empty. It looks like Omada don't get connected to the router. Reboot both won't help. It is very dissapointing. My smartphone gets now a message from the Omada-app every 2 minutes...
How can I fix this? Or is the new firmware buggy?
I'm using Omada 5.7.4.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Dear @MikeLa ,
MikeLa wrote
Hello, since the update to 2.1.0 the ER605 no longer starts. Even a reset and downgrade to 2.0.1 didn't help. Only when you disconnect the ER605 from the power supply and after about 1 minute press the reset button does it start up. I have 3 systems and all the same. Omada 5.7.6 and 5.7.4
Thank you so much for taking the time to post the issue on TP-Link community!
To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue.
The ticket ID is TKID230129692, please check your email box and ensure the support email is well received. Thanks!
Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.
Many thanks for your great cooperation and patience!
- Copy Link
- Report Inappropriate Content
@Hank21 The new beta version 2.1.0 for ER605v2 causes no adoption loop :) Thanks for the fix!
- Copy Link
- Report Inappropriate Content
When will it be released?
- Copy Link
- Report Inappropriate Content
So when will v2_2.1.0 (or greater) be patched and released again? It was quickly removed from TP-links's ER605 firmware download page the day the problems stating rolling in on the forums!
- Copy Link
- Report Inappropriate Content
Has anyone taken the leap on the new ER605 v2 firmware yet? How has it been performing? Is mDNS working now?
- Copy Link
- Report Inappropriate Content
Yes I have. Working as expected. All the issues we had seem to be resolved now. Also upgraded to 5.8.4 on our controller (first). That maybe also why we have no issues.
- Copy Link
- Report Inappropriate Content
I did this morning. Not running mDNS, but install went without issue and everything is working perfectly.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 6
Views: 10698
Replies: 68