EAP245 ohne Controller hinter FRITZ!Box?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi, bin mit dem wlan, welches meine FRITZ!Box 6591 cable erstellt und ich als mesh mit einer 7520 nutze, sehr unzufrieden.
Meine Idee war jetzt die 6591 nur als Router zu nutzen und das wlan dort zu deaktivieren.
WLAN sollen dann von den 2-3 EAP245 verteilt werden. Ich befürchte aber ich brauche dann den Controller OC200 um das wlan zu erstellen, richtig?
Danke
René
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
It is not necessary to use the controller to manage all EAPs. However, it is recommended to use it if you have 2-3 and you'd like to have a unified control on all of your EAP. By using it, you can change the SSID at the same time.
Yet, fast roaming and mesh require the controller to be running 24x7 which requires your controller to be online all the time to control the mesh and roaming.
Up to you. Currently, 3 types of controllers are available. Software(free), paid Hardware(OC200), and paid Cloud-based. One-time payment to get a hardware controller. And annual license for Cloud-based controller.
- Copy Link
- Report Inappropriate Content
It is not necessary to use the controller to manage all EAPs. However, it is recommended to use it if you have 2-3 and you'd like to have a unified control on all of your EAP. By using it, you can change the SSID at the same time.
Yet, fast roaming and mesh require the controller to be running 24x7 which requires your controller to be online all the time to control the mesh and roaming.
Up to you. Currently, 3 types of controllers are available. Software(free), paid Hardware(OC200), and paid Cloud-based. One-time payment to get a hardware controller. And annual license for Cloud-based controller.
- Copy Link
- Report Inappropriate Content
Thanks for the reply.
so without a controller (software or hardware) I can not use the mesh functionality? That means my devices are not roaming between the EAPs?
Thanks.
- Copy Link
- Report Inappropriate Content
You can turn off the controller after config your SSID. This does not affect anything. Yet, Fast Roaming and Mesh function only when the controller is running.
That is to say, you want to enjoy Fast Roaming and Mesh? You gotta keep the controller running to support this.
- Copy Link
- Report Inappropriate Content
hm ok.
So I will have to decide either use the oc200 or have a Raspberry pi running the software 24/7?
Is the cloud solution as well working? If yes I need to check for pricing.
This is for private use and not business or similar.
thx
- Copy Link
- Report Inappropriate Content
pi would be a good choice if you have one. that can do the trick
price can be found after you log in via the cloud portal. price is universal to anyone as I recall.
https://omada.tplinkcloud.com/
- Copy Link
- Report Inappropriate Content
@Tedd404 Thanks for your answers. Finally the lazy choice won. I ordered 2x EAP245 + 1x oc200. Will put the OC behind my FRITZ!box and then I should be fine.
- Copy Link
- Report Inappropriate Content
sure it is. 
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 554
Replies: 7
Voters 0
No one has voted for it yet.