Hi @JGilmour 

I am not sure about "192.168.1.1 to suit my network"

But what you reported is quite strange. The common solution resolving such a problem would be

1. Clear your browser cache. Relaunch it and try again.

2. Use incognito mode/private mode.

Or you can use another browser or laptop to check.

3. Make sure your LAN IP is not duplicated. This is super important. Do not have two duplicate Gateways(192.168.1.1) in your topology if you are new to this. This is not gonna be a proper way to use the router.

Problem here is some sort of related...

5 Moths ago i bought 2 ER605 devices to set up a stable VPN connection between my 2 appartments.

1 ER605 v2 was working fine for 2-3 months, configured to 10.0.0.x internal and connected to Wan(fixed IP). VPN was working fine per IPSEC Site to SITE connection.

One day stopped to work with no visible reason, no more data flow in any direction. Login page showed: Timed Out please try to login again at every try.

After some time a reset to default was made, it worked and device is responding to 192.168.0.1 as expected.

Login still not possible again, it leads to the password set entry page where a login should be entered, but again every try ends in same result: Timed Out please try to login again.

The second device is still in a good condition, no problems at all. So is there a way to maybe flash the device with new firmware without log in? Or some other resolution to get it in a usable shape again?

br,

Vibe68