Hi @Toast789 @mrdeadlocked @WindyBinDay @Springs42 

Confirmed w/ the dev that there will be a beta for standalone to have the next server. If you are using a controller, please let me know the controller version.

Future firmware updates for the router will resolve this issue. Please patiently wait for the future firmware updates.

  @Clive_A the qr code is not working. I think the link is expired or something.

Hi @Toast789 

Thanks for posting in our business forum.

Toast789 wrote

  @Clive_A the qr code is not working. I think the link is expired or something.

That previous link was a direct download to the file. The session was terminated later by the file server. So it does not work anymore.

Download the new QR code from that again. I updated it.

I used the 2.2.3 Build 20231201 Rel.57231 firmware. PXE booting works fine. I used netboot dot xyz efi

  @Toast789 

I upgraded my stand alone ER605 v2.0 to firmware 2.2.3 Build 20231201 Rel.32918 and TFTP address is still my gateway address.

Firmware version mentioned above does not appear on the list of available downloads.

  @WallyJericho @Clive_A 

I installed firmware ER605 2.2.4 Build 20240119 Rel.44368 and TFTP server setting is still not working. 

It seems that the advanced LAN settings are completely ignored.

Am I missing a vital step?

I am also experiencing the same problem.

Hardware version: ER605 v2.0

Firmware Version: 2.2.4 Build 20240119 Rel.44368

The Advanced Settings for DHCP does not appear to be applying. Despite setting DHCP Network Boot (Option 67) and DHCP TFTP Server (Option 66), the endpoint does not appear to get these necessary values when trying to boot. The endpoint stays on "Start PXE over IPv4 on MAC xxxx" without ever getting the IP address for the TFTP server.