Home

Forums

Stories

Knowledge Base

Business Community > Routers > ER605 V2 - PXE Boot not working?

< Routers

ER605 V2 - PXE Boot not working?

ER605 V2 - PXE Boot not working?

37 Reply

2023-12-01 09:57:30

Posts: 5742

Helpful: 2766

Solutions: 1299

Stories: 0

Registered: 2023-06-09

Re:ER605 V2 - PXE Boot not working?

2023-12-01 09:57:30

Hi @Toast789 @mrdeadlocked @WindyBinDay @Springs42

Confirmed w/ the dev that there will be a beta for standalone to have the next server. If you are using a controller, please let me know the controller version.

Future firmware updates for the router will resolve this issue. Please patiently wait for the future firmware updates.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

0

0

#12

2023-12-07 01:10:08 - last edited 2024-03-15 01:47:58

Posts: 5742

Helpful: 2766

Solutions: 1299

Stories: 0

Registered: 2023-06-09

Re:ER605 V2 - PXE Boot not working?-Solution

2023-12-07 01:10:08 - last edited 2024-03-15 01:47:58

Hi everyone in this thread,

Clive_A wrote

Hi @Toast789 @mrdeadlocked @WindyBinDay @Springs42

Confirmed w/ the dev that there will be a beta for standalone to have the next server. If you are using a controller, please let me know the controller version.

Future firmware updates for the router will resolve this issue. Please patiently wait for the future firmware updates.

Here's the beta firmware for you. Please download it here: download

It adds support to the next server in standalone mode. For anyone who uses a controller, this might not be as helpful. Please wait for the future firmware of the Omada Controller.

File:

ER605 V2 2.2.3 Beta Addressing next-server.pngDownload

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

Recommended Solution

0

0

#13

LV1

2023-12-07 10:23:03

Posts: 3

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-11-27

Re:ER605 V2 - PXE Boot not working?

2023-12-07 10:23:03

@Clive_A the qr code is not working. I think the link is expired or something.

0

0

#14

2023-12-08 01:21:58 - last edited 2023-12-08 01:31:05

Posts: 5742

Helpful: 2766

Solutions: 1299

Stories: 0

Registered: 2023-06-09

Re:ER605 V2 - PXE Boot not working?

2023-12-08 01:21:58 - last edited 2023-12-08 01:31:05

Thanks for posting in our business forum.

Toast789 wrote

@Clive_A the qr code is not working. I think the link is expired or something.

That previous link was a direct download to the file. The session was terminated later by the file server. So it does not work anymore.

Download the new QR code from that again. I updated it.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

0

0

#15

LV1

2023-12-11 17:27:15

Posts: 10

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2021-03-20

Re:ER605 V2 - PXE Boot not working?

2023-12-11 17:27:15

I am on Software Controller. Controller Version 5.13.10. I'll gladly test when a version come sout.

0

0

#16

LV1

2023-12-13 03:52:11

Posts: 3

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-11-27

Re:ER605 V2 - PXE Boot not working?

2023-12-13 03:52:11

I used the 2.2.3 Build 20231201 Rel.57231 firmware. PXE booting works fine. I used netboot dot xyz efi

0

0

#17

LV1

2024-01-25 22:16:31 - last edited 2024-01-27 15:09:58

Posts: 5

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2024-01-25

Re:ER605 V2 - PXE Boot not working?

2024-01-25 22:16:31 - last edited 2024-01-27 15:09:58

I upgraded my stand alone ER605 v2.0 to firmware 2.2.3 Build 20231201 Rel.32918 and TFTP address is still my gateway address.

Firmware version mentioned above does not appear on the list of available downloads.

0

0

#18

LV1

2024-01-27 15:09:29 - last edited 2024-01-29 15:46:40

Posts: 5

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2024-01-25

Re:ER605 V2 - PXE Boot not working?

2024-01-27 15:09:29 - last edited 2024-01-29 15:46:40

@WallyJericho @Clive_A

I installed firmware ER605 2.2.4 Build 20240119 Rel.44368 and TFTP server setting is still not working.

It seems that the advanced LAN settings are completely ignored.

Am I missing a vital step?

0

0

#19

LV1

2024-01-29 20:51:19

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-01-29

Re:ER605 V2 - PXE Boot not working?

2024-01-29 20:51:19

I am also experiencing the same problem.

Hardware version: ER605 v2.0

Firmware Version: 2.2.4 Build 20240119 Rel.44368

The Advanced Settings for DHCP does not appear to be applying. Despite setting DHCP Network Boot (Option 67) and DHCP TFTP Server (Option 66), the endpoint does not appear to get these necessary values when trying to boot. The endpoint stays on "Start PXE over IPv4 on MAC xxxx" without ever getting the IP address for the TFTP server.

0

0

#20

2024-01-30 02:47:55 - last edited 2024-01-30 02:49:27

Posts: 5742

Helpful: 2766

Solutions: 1299

Stories: 0

Registered: 2023-06-09

Re:ER605 V2 - PXE Boot not working?-Solution

2024-01-30 02:47:55 - last edited 2024-01-30 02:49:27

Hi @WallyJericho

Thanks for posting in our business forum.

WallyJericho wrote

@WallyJericho @Clive_A

I installed firmware ER605 2.2.4 Build 20240119 Rel.44368 and TFTP server setting is still not working.

It seems that the advanced LAN settings are completely ignored.

Am I missing a vital step?

If you are not reading the thread carefully, let me point you the issue.

You are NOT using the same firmware as they do.

And my previous reply was a beta firmware provided by the download link which has expired for a long long time. (7-day)

Here's the link I created again. Note that the firmware may not include the features you see on 2.2.4 now.

In addition, the official fix to this issue will come out on V5.15(ETA). Disclaimer, this is not a guarantee but informative use.

Expired before Feb 6th: https://we.tl/t-3q5Vycz4Kl

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

Recommended Solution

0

0

#21