MSP Mode on OC200 (5.11.10)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

MSP Mode on OC200 (5.11.10)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
MSP Mode on OC200 (5.11.10)
MSP Mode on OC200 (5.11.10)
2023-07-12 12:59:38 - last edited 2023-07-13 01:57:50

I followed these instructions:

 

I must be blind and Im not seeing the MSP mode:

 

I can not teach anyone anything - I can only make them think - Socrates
  1      
  1      
#1
Options
1 Accepted Solution
Re:MSP Mode on OC200 (5.11.10)-Solution
2023-07-13 01:57:28 - last edited 2023-07-13 01:57:50

Hello @KimcheeGUN

 

Thank you for your valuable feedback! I apologize for the error in the release note on this thread and it has been corrected now.

Unfortunately, the hardware controller cannot support MSP due to hardware limitations. Currently, only the software controller can support MSP.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#3
Options
12 Reply
Re:MSP Mode on OC200 (5.11.10)
2023-07-12 13:09:59
I can not teach anyone anything - I can only make them think - Socrates
  0  
  0  
#2
Options
Re:MSP Mode on OC200 (5.11.10)-Solution
2023-07-13 01:57:28 - last edited 2023-07-13 01:57:50

Hello @KimcheeGUN

 

Thank you for your valuable feedback! I apologize for the error in the release note on this thread and it has been corrected now.

Unfortunately, the hardware controller cannot support MSP due to hardware limitations. Currently, only the software controller can support MSP.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#3
Options
OC200(UN)_V1_1.25.2 Build 20230704
2023-07-13 02:29:45

  @Hank21 to report a problem with the new update all my clients were in lan and not in wireless now everyone is asked for the voucher again what do I do to solve this error

  0  
  0  
#4
Options
OC200(UN)_V1_1.25.2 Build 20230704
2023-07-13 10:05:47

Hello  @oscar321,

 

The issue is related to the Voucher issue after the firmware upgrades of OC200, I will update it in your post here.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#5
Options
OC200(UN)_V1_1.25.2 Build 20230704
2023-07-14 17:26:48

  @Hank21 hello Hank! I'm not able to see the update option in my portal . I have the OC200. I was able to see the update 2 days ago but i didn't wanna update soo soon... i wanted to try today but looks like the update was pulled off... i see the same scenario even with ER605 v1 that i own too. Could you pls give clarity! Thanks in advance!

  0  
  0  
#6
Options
Re:MSP Mode on OC200 (5.11.10)
2023-07-14 20:37:33

  @Hank21 

 

I have the soft controller, and the most current version. I do not see MSP stuff in mine.  There is something called HOTSPOT, is that it?  It seems to only show every so often.  One day its there, the next its not.  Same with the IPS sheild button. Sometimes it is there, most the its not there . 

 

It may be related to how its accessed. Example, If I select a site, move around in site, then return to global view, they show. But If I click on settings, move around, then back to global, they gone. As if the page with those settings can only be accessed via one path, the other links / paths show an interface missing those options. 

  0  
  0  
#7
Options
OC200(UN)_V1_1.25.2 Build 20230704
2023-07-15 06:55:55

  @oscar321 I have had a similar experience with this and observed the behavior of new upgraded firmware with OC200.

I have a work around, those who are affected who reported 

1. Replace their voucher with the available earlier generated, or create a new one.

2. Issue seems not all voucher user who a currently activated or with valid voucher during the systems got a problem; some of them works well.

3. Only weird thing here it shows most of those not affected users saw their device on LAN instead on SSID, where they associate or activate the connection voucher.

4. I have a similar post related to my experience observation; might some be diff from other voucher operators?

Subject Post: Firmware Update 1.25.2 Issue for Existing Omaha Voucher Activated in System and Gui Performance

 

 

 

  0  
  0  
#8
Options
OC200(UN)_V1_1.25.2 Build 20230704
2023-07-17 08:11:24

Hello @JhonneL-MDA,

 

Thanks for reporting this issue to the TP-Link community!


We greatly appreciate such detailed information you provided, I have forwarded this updated issue of OC200 to the engineer for further investigation. For now, please roll back your firmware version to the previous OC200 V5.9. I will keep you updated on any progress.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#9
Options
Re:MSP Mode on OC200 (5.11.10)
2023-07-17 08:17:32

Hello @DaKings

 

To use this MSP mode, enable it first in Global view > ⋮ icon in the top-right corner > Enable MSP mode, you can also disable it from the same location.

 

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  1  
  1  
#10
Options
OC200(UN)_V1_1.25.2 Build 20230704
2023-07-17 08:18:51

Hello @mdominic7,

 

We have received feedback regarding voucher-related issues on Hardware Controller v5.11 and Windows Software Controller v5.12.

Rest assured, we are working diligently to provide a fix as soon as possible.

If you do not use the voucher feature, downgrading may not be necessary.

 

If you are facing any other issues with controller v5.11 or v5.12, please don't hesitate to share your feedback here.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#11
Options