Migration
I am currently using the software controller v5.12.7. I have purchase a hardware OC200 and ran the latest update so now it's at 5.12.9.
Can I do a migration from Software v5.12.7 -> Hardware v5.12.9?
Thanks so much in advance.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hey
If you backup the software controller and then restore it to the OC200 that will work for you. I havent personally used the migration tool, but in theory it should also work
The only time ive known an issue is if the firmware you are moving too is older, in your case this isnt a concern. The Hardware and Software controllers run the same SDN so as long as versions are good there should be no issues for you.
- Copy Link
- Report Inappropriate Content
Hey
If you backup the software controller and then restore it to the OC200 that will work for you. I havent personally used the migration tool, but in theory it should also work
The only time ive known an issue is if the firmware you are moving too is older, in your case this isnt a concern. The Hardware and Software controllers run the same SDN so as long as versions are good there should be no issues for you.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 301
Replies: 2
Voters 0
No one has voted for it yet.