Accepted Wireguard Peers: Endpoint with domain names
Hello everyone,
I currently have the problem that i can't insert a domain for a Wireguard peer. The user interface only allwos me to insert IPs.
However, Wireguard settings for endpoints domain names are normally also possible. So why not here?
Normal Wireguard Configuration:
[Interface]
Address = 10.1.1.1/24
DNS = 1.1.1.1
[Peer]
PublicKey = XXXXXXXXXXXXXXX
AllowedIPs = 192.168.0.0/24
Endpoint = test(x)domain(x)de:54112
PersistentKeepalive = 25
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @shamrocknl
It has been projected. This feature has been scheduled on Omada Controller V5.15.X and adapted firmware. See the other accepted label.
- Copy Link
- Report Inappropriate Content
Hello @Ziesie,
Thank you for your valuable feedback.
I've recorded this request and will report it to the developer team for evaluation.
- Copy Link
- Report Inappropriate Content
+1
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
ER7206 and ER605 too
I need to access 24 endpoints that use DDNS. Tp-link is not a option
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
How is this not a thing yet, major issue for setting up site to site connections
- Copy Link
- Report Inappropriate Content
I see the option for openVPN was accepted: https://community.tp-link.com/en/business/forum/topic/643876
Does that mean this will also be implemented?
- Copy Link
- Report Inappropriate Content
Hi @shamrocknl
It has been projected. This feature has been scheduled on Omada Controller V5.15.X and adapted firmware. See the other accepted label.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 1152
Replies: 10