Business Community > WiFi > No 5G on one of my Omada WAPs
< WiFi

No 5G on one of my Omada WAPs

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

No 5G on one of my Omada WAPs

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
No 5G on one of my Omada WAPs
No 5G on one of my Omada WAPs
2023-11-20 12:45:38 - last edited 2023-11-20 12:48:59
Model: EAP650  
Hardware Version: V1
Firmware Version: 1.0.7 Build 20230423 Rel. 75707

I have two WAPs in my network. In OC200 controller, I see the following in details of one of them:

 

 

While the other shows:

 

 

This gave me the impression that the second AP doesn't provide 5G. Does anyone know what is going on and how to fix this? They both have the same configuration...

 

By the way, the utilization doesn't make much sense, since it's sometimes high even when nobody is there...

  0      
 
  0      
 
#1
Options
9 Reply
Re:No 5G on one of my Omada WAPs
2023-11-20 13:14:50

  @SMX42 

 

Do both APs have exactly the same profile?  If not, it's possible to only define a 2.4G SSID.

 

Verify that the 5.8G radio is enabled on the second unit.

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#2
Options
Re:No 5G on one of my Omada WAPs
2023-11-20 13:45:20

  @d0ugmac1 I don't know what you mean by Profile, but they both are a part of a Mesh network with supposedly seamless roaming. There is only one SSID created by my controller unit, and it seems serving both bands automatically. I just don't know why the second AP doesn't show 5G activated...

  0  
  0  
#3
Options
Re:No 5G on one of my Omada WAPs
2023-11-20 13:54:42

  @SMX42 

 

Compare the settings for both APs (I assume both are 650's) here and validate both have active 5G radios and valid channels and power

 

 

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#4
Options
Re:No 5G on one of my Omada WAPs
2023-11-20 14:51:18 - last edited 2023-11-20 15:45:32

  @d0ugmac1 Well, it doesn't look like it (right side):

vs. 

 

One weird thing is that the controller says the APs hardware are v1.0 while on the sticker it says v1.2, and also the firmware is v1.0.7 and it's built in 2023 while there is no such driver available to download from the website.

 

I've also connected an additional EAP225 for testing, and that also works fine with both 2.4G & 5G bands!

  0  
  0  
#5
Options
Re:No 5G on one of my Omada WAPs
2023-11-20 16:36:22 - last edited 2023-11-20 16:36:50

  @SMX42 

 

 

 

 

 

 

 

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#6
Options
Re:No 5G on one of my Omada WAPs
2023-11-20 16:39:24

  @d0ugmac1 That is already enabled... I've disabled and re-enabled it before, but didn't change a thing. I also copied all the configs from the other AP, but the result is still the same. Is it a kind of conflict or overlap with the other AP maybe?

  0  
  0  
#7
Options
Re:No 5G on one of my Omada WAPs
2023-11-20 22:04:13

  @SMX42 

 

Have you tried a 'Force Provision' or even a 'Forget' and 'Re-Adopt' yet to start with a fresh config?

 

Also wondering if your controller supports the mystery firmware is not compatible with the controller version you are using?

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#8
Options
Re:No 5G on one of my Omada WAPs
2023-11-21 13:26:13 - last edited 2023-11-21 13:32:12

  @d0ugmac1 I've done both, the result is the same... really strange... What I know is that when I had the other AP off, this one did once provide 5G as well... but after re-connecting the other one and rebooting everything, it disappeared...

 

The strange thing is that I tried to re-install the firmware from the ones I found on the website, but it gives me the error that the firmware file is not correct.

  0  
  0  
#9
Options
Re:No 5G on one of my Omada WAPs
2023-11-21 16:38:02

  @SMX42 

 

Ok, if you temporarily power-off the working AP, can you 'see' 5.8G signal from the dysfunctional unit?  If yes, it's a controller software issue, if no, it's an AP firmware issue, possibly as it interacts with the Controller.

 

If you default/reset the dysfunctional AP, and then set it up in Standalone mode, does it work on both 2.4 and 5.8?

<< Paying it forward, one juicy problem at a time... >>
  1  
  1  
#10
Options

Information

Helpful: 0

Views: 718

Replies: 9

Related Articles
Can my WAPs be in a mesh network?
347 0
One-To-One NAT Omada SDN
2633 6
Discovering WAPs on another network
876 0
2 Omada controllers on one site
994 0
Omada Controller with two Switches and one Router
978 1
 Multiple SSID, same subnet, one without internet
442 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.