Activate wake on lan on a TL-SG3428X Switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Activate wake on lan on a TL-SG3428X Switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Activate wake on lan on a TL-SG3428X Switch
Activate wake on lan on a TL-SG3428X Switch
2023-12-11 07:19:31
Model: TL-SG3428X  
Hardware Version: V1
Firmware Version: 1.0.12 Build 20230602 Rel.76586

Since a changed the switch, wake on lan from the outside (Firewall) is not working anymore. In the Network wake on lan is sill working,

How can I make wake on lan working from the firewall working again?

Thanks/Nader

  0      
  0      
#1
Options
1 Reply
Re:Activate wake on lan on a TL-SG3428X Switch
2023-12-12 01:36:42

Hi @Nader_Sanders 

Thanks for posting in our business forum.

There is nothing to do with the switch. Switch is switching based on the MAC address table. It would not be affected by the firewall. WOL if works locally on your LAN, then it rules out the switch issue.

So, check your firewall or NAT on the router. It's more like you've set up something blocking the WOL.

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ (Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)
  0  
  0  
#2
Options