Extend a EAP225-Outdoor Wired to a EAP225-Outdoor Wireless to extend Mesh without cables....

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Extend a EAP225-Outdoor Wired to a EAP225-Outdoor Wireless to extend Mesh without cables....

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Extend a EAP225-Outdoor Wired to a EAP225-Outdoor Wireless to extend Mesh without cables....
Extend a EAP225-Outdoor Wired to a EAP225-Outdoor Wireless to extend Mesh without cables....
2023-12-12 22:00:31 - last edited 2023-12-25 09:36:53
Tags: #Mesh
Model: EAP225-Outdoor  
Hardware Version:
Firmware Version:

Hi, Reading this article, is it possible to Extend a EAP225-Outdoor Wired to a EAP225-Outdoor Wireless to extend Mesh without cables....

 

https://www.tp-link.com/us/support/faq/2949/ 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Extend a EAP225-Outdoor Wired to a EAP225-Outdoor Wireless to extend Mesh without cables....-Solution
2023-12-13 08:28:23 - last edited 2023-12-25 09:36:53

Hi @Ziggy77,

 

Yes, EAP225-Outdoor supports the mesh feature. To establish the mesh network, you will need to connect one EAP to the router/switch via Ethernet cable, and the other EAPs will be able to wireless connect to each other. With the mesh network, you just need to power on the other EAPs, and they will not need to connect to the router/switch via Ethernet cable.
Please note that: You will need to configure the Mesh network on the controller. So please download a software controller or purchase a hardware controller like OC200/OC300.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:Extend a EAP225-Outdoor Wired to a EAP225-Outdoor Wireless to extend Mesh without cables....-Solution
2023-12-13 08:28:23 - last edited 2023-12-25 09:36:53

Hi @Ziggy77,

 

Yes, EAP225-Outdoor supports the mesh feature. To establish the mesh network, you will need to connect one EAP to the router/switch via Ethernet cable, and the other EAPs will be able to wireless connect to each other. With the mesh network, you just need to power on the other EAPs, and they will not need to connect to the router/switch via Ethernet cable.
Please note that: You will need to configure the Mesh network on the controller. So please download a software controller or purchase a hardware controller like OC200/OC300.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 191

Replies: 1

Tags

Related Articles