TL-SG3428 v2.0 fails firmware upgrade 2.30.0 being suggested by the controller
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi All,
I have a firmware push that seems to be failing with the message of invalid version. The update looks like it has valuable fixes but it will not apply what is currently being suggested by the controller version 2.30.0.
My current controller is on version 5.13.22
Message in my log-
xx-xx-xx-xx-xx-xx upgrade failed: The upgrade file is invalid. Please select a correct file.
Any suggestions on how to fix? Somehow did I skip a firmware update that is now causing the issue?
Thanks
Robert-
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Have you tried to check your Java? https://community.tp-link.com/en/business/forum/topic/646246
If you are using Omada software controller and your Java is not 64-bit, you will fail the authentication of firmware.
- Copy Link
- Report Inappropriate Content
I had a similar issue.
Give this a look: https://community.tp-link.com/en/business/forum/topic/615418
Basically this is what it says:
>Here is the process I encountered today while upgrading the TL-SG3428 from firmware 2.0.10 to 2.0.11.
>1) Tried to use Omada to do the upgrade from the Devices page - in the "automatic" fashion - this attempt gave a failure message saying that the file was corrupt.
>2) Tried to use Omada to do the upgrade from Device -> Config -> Manage Device -> Custom Upgrade - this attempt also gave a failure message.
>3) Rebooted the SG3428 and it shows successfully upgraded to firmware 2.0.11.
Hope that helps.
Best,
Carl
- Copy Link
- Report Inappropriate Content
No Joy... I tried to download the file and still will not upgrade and now I have one for the router and it is doing the same.
The router is a ER707-M2 v1.0 with Installed version 1.1.1 Build 20230927 Rel.35167 when I try to install the latest version 1.2.0 Build 20231214 Rel.77297 suggested by the controller or if I download and try to install it I get the same invalid message.
Robert-
- Copy Link
- Report Inappropriate Content
Have you tried to check your Java? https://community.tp-link.com/en/business/forum/topic/646246
If you are using Omada software controller and your Java is not 64-bit, you will fail the authentication of firmware.
- Copy Link
- Report Inappropriate Content
Hi Clive,
Looks like the Java issue you referenced. I was using an OC200 and I never gave thought to the version of Java. I wanted to keep more logging so I starting using Omada on a Pi. I migrated to my backup windows controller which I know has Java 64bit and was able to apply the firmware updates.
Thanks for the help,
Robert-
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 920
Replies: 4
Voters 0
No one has voted for it yet.