Solution Slow/unstable networking speed EAP683 LR(EU) v1.0 using VLAN
While using the EAP683 LR with PPSK on an SSID with VLAN-1, nothing goes wrong. As soon as I switch to another VLAN, using another password, the speed drops to 1 Mbps down and 0.04 up.
I'm also using an EAP650-outdoor. When I switch to that AP, the problem doesn't appear. So I'm thinking the problem is with the EAP683 LR.
Thanks!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Hank21 LAN info:
OC200 (v5.13.30.50)
ER8411
SX3206HPP
SG3218XP-M2
EAP670v2
EAP683LR(US) currently disconnected due to a high number of Rx dropped packets/errors
4 VLANs with corresponding WLANs
Admin
Home
Camera
IoT
Was using latest firmware EAP683 UR(US)_V1.6_1.0.2 Build 20240102 with about 50-55% of Rx drop packets/errors. Switched to the suggested above EAP683LR(EU_US_CA_JP)_v1_EAP683LR(US)_v1.6_1.1.0_Build20240412(pre-release)
SLight improvement but still about 30-35% of Rx dropped packets/errors. I don't have a screen shot since i disconnected EAP683 but I was monitoring it from OC200 / Deveices / EAP683 / Radios screen.
To compare I also have EAP670v2 running on the latest firmware in the same setup - Zero issues.
- Copy Link
- Report Inappropriate Content
Is the EAP670 v2 connected to the same location as the EAP683LR? Apart from the error, are there any network problems? Does the 5G or 2.4G experience this error?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2437
Replies: 22
Voters 0
No one has voted for it yet.