Business Community > WiFi > EAP245 V4_1.3.0_Build 20240126 Pre-release (Released on Feb 5th, 2024)
< WiFi

Early Access EAP245 V4_1.3.0_Build 20240126 Pre-release (Released on Feb 5th, 2024)

12

Early Access EAP245 V4_1.3.0_Build 20240126 Pre-release (Released on Feb 5th, 2024)

Early AccessEAP245 V4_1.3.0_Build 20240126 Pre-release (Released on Feb 5th, 2024)
EAP245 V4_1.3.0_Build 20240126 Pre-release (Released on Feb 5th, 2024)
2024-02-05 07:20:03 - last edited 3 weeks ago
Tags: #Firmware Update #Official

This Article Applies to:  EAP245 V4/V4.6 | Adapted to Omada SDN Controller v5.9

Release Notes

 

New Feature/Enhancement

 

1. Add support for Bonjour Service in Controller mode.

2. Add support for PMF in Controller mode.

3. Add support for NTP time synchronization in Controller mode.

4. Add support for LLDP (Link Layer Discovery Protocol).

5. Add support for IPv6.

6. Add support for multiple RADIUS servers for WPA-Enterprise authentication.

7. Add support for diagnose tools function, including Ping, Traceroute, Packet Capture, Terminal, and Device Info.

8. Add support for ‘Lock to AP’.

9. Add support for SSID Rate Limit.

10. Add support for Multicast Management in Controller mode.

11. Add support for reporting RADIUS username.

12. Add support for reporting single-core CPU utilization.

13. Add support for 802.11r function.

 

Bug Fixed

 

1. Fixed the bug of high CPU utilization when using EAP245 with certain switches.

 

Firmware Download

 

Attention

1. Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!

2. Please ensure that you know which version (EU/US/CA/JP/EG) you shall use on your Omada EAP devices before you download the following EAP firmware.

 

EAP245(EU/US/EG/CA/JP)_V4_1.3.0_Build 20240126 (Pre-release version)

 

Notes:

(1) The above firmware is applied to EAP245 V4.0 and V4.6.

(2) Your device’s configuration won’t be lost after upgrading.

(3) The above firmware is fully adapted to Omada SDN Controller v5.9.

 

 

Feedback

 

Any further feedback on the new firmware, please feel free to comment below or start a new thread from HERE.

To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.

 

When reporting an issue, especially it's about firmware upgrade, it's suggested to include the following info:

  • Management mode (Controller or Standalone)
  • Device Model(s) and Hardware
  • Device Firmware (previous and current)

 

Thank you in advance for your great cooperation and support.

 

Recommended Threads

 

Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!

Current Available Solutions to Omada EAP Related Issues [Constantly Updated]

Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates

 

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0      
 
  0      
 
#1
Options
19 Reply
Re:EAP245 V4_1.3.0_Build 20240126 Pre-release (Released on Feb 5th, 2024)
2024-02-05 21:10:11

  @Hank21 No PPSK still?

 

  0  
  0  
#2
Options
Re:EAP245 V4_1.3.0_Build 20240126 Pre-release (Released on Feb 5th, 2024)
2024-02-07 09:04:37

Hi @Hank21 ,

 

8. Add support for ‘Lock to AP’.

 

Thank you, finally ! I assume that we need to wait for the 7212PC to get a future update with the controller version 5.9 minimum to be able to access all the new features ? 

 

Thanks !

  0  
  0  
#3
Options
Re:EAP245 V4_1.3.0_Build 20240126 Pre-release (Released on Feb 5th, 2024)
2024-02-08 01:30:02

Hi @BoBsss，

 

Yes, Lock to AP is a new feature added from Controller v5.9, need to be sure your controller's version is v5.9 or above.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#4
Options
Re:EAP245 V4_1.3.0_Build 20240126 Pre-release (Released on Feb 5th, 2024)
2024-02-09 05:03:27

  @Hank21 There's a bug in this firmware, after a day or so the speed falls down to 40-50mbps and I have to reboot the access point  to get it to work normally.

  0  
  0  
#5
Options
Re:EAP245 V4_1.3.0_Build 20240126 Pre-release (Released on Feb 5th, 2024)
2024-02-12 13:06:45

Is there a target date for the EAP245 V3 ?

OmadaLinux v5.13.10 R605 V1:1.3.0 - Build 20230511 R.51317 SG2008P V1:V1.0.8 Build 20230602 R.73473 SG2008P V3:V3.0.5 Build 20230602 R.73473 3 x EAP245 V3:V5.1.0-Build 20230104 R.79433
  5  
  5  
#6
Options
Re:EAP245 V4_1.3.0_Build 20240126 Pre-release (Released on Feb 5th, 2024)
2024-02-18 01:57:52

Hi @AmanSaroha，

 

Can you reproduce the issue stably? Did you use the IPerf tool to test the speed and the link speed on the PC?

Please verify whether this issue can be fixed after a firmware downgrade.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#7
Options
Re:EAP245 V4_1.3.0_Build 20240126 Pre-release (Released on Feb 5th, 2024)
2024-02-21 17:51:31

  @Hank21 Any idea of when the ER7212PC will get the controller 5.9 version ? So we can install and enjoy that EAP245 1.3.0 ? :)

  0  
  0  
#8
Options
Re:EAP245 V4_1.3.0_Build 20240126 Pre-release (Released on Feb 5th, 2024)
2024-02-22 01:38:06

Hi @BoBsss,

 

Sorry but I have no idea either, please keep an eye on the official website.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#9
Options
Re:EAP245 V4_1.3.0_Build 20240126 Pre-release (Released on Feb 5th, 2024)
2024-02-22 02:03:24

Hi @AmanSaroha,

 

To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID is TKID240241208, please check your email box and ensure the support email is well received. Thanks!

Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.

Many thanks for your great cooperation and patience!

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#10
Options
Re:EAP245 V4_1.3.0_Build 20240126 Pre-release (Released on Feb 5th, 2024)
2024-02-29 11:33:07

TandS wrote

Is there a target date for the EAP245 V3 ?

  @TandS @Hank21 I was wondering the same.

  3  
  3  
#11
Options
12

Information

Helpful: 0

Views: 1704

Replies: 19

Tags

Firmware Update Official
Related Articles
EAP225 V5_1.3.0_Build 20240126 Pre-release (Released on Feb 5th, 2024)
977 0
EAP223 V1_1.3.0_Build 20240131 Pre-release (Released on Mar 7th, 2024)
161 0
EAP245 V4_1.2.0_Build 20230417 Beta Firmware (Released on July 21st, 2023)-[Thread Closed]
1085 0
Version/Releas/Firmware chaos on OC 200
661 0
EAP230-Wall V1, EAP235-Wall V1 3.2.0_Build 20240103 Pre-release (Released on Mar 8th, 2024)
368 0
EAP223 V2, EAP225 V3&V3.2 EAP225 V4 EAP225-Outdoor V1&V3 Pre-release (Released on Mar 3rd, 2024)
1653 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.