Early Access EAP245 V4_1.3.0_Build 20240126 Pre-release (Released on Feb 5th, 2024)
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
This Article Applies to: EAP245 V4/V4.6 | Adapted to Omada SDN Controller v5.9
Release Notes
New Feature/Enhancement
1. Add support for Bonjour Service in Controller mode.
2. Add support for PMF in Controller mode.
3. Add support for NTP time synchronization in Controller mode.
4. Add support for LLDP (Link Layer Discovery Protocol).
5. Add support for IPv6.
6. Add support for multiple RADIUS servers for WPA-Enterprise authentication.
7. Add support for diagnose tools function, including Ping, Traceroute, Packet Capture, Terminal, and Device Info.
8. Add support for ‘Lock to AP’.
9. Add support for SSID Rate Limit.
10. Add support for Multicast Management in Controller mode.
11. Add support for reporting RADIUS username.
12. Add support for reporting single-core CPU utilization.
13. Add support for 802.11r function.
Bug Fixed
1. Fixed the bug of high CPU utilization when using EAP245 with certain switches.
Firmware Download
Attention
1. Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
2. Please ensure that you know which version (EU/US/CA/JP/EG) you shall use on your Omada EAP devices before you download the following EAP firmware.
EAP245(EU/US/EG/CA/JP)_V4_1.3.0_Build 20240126 (Pre-release version)
Notes:
(1) The above firmware is applied to EAP245 V4.0 and V4.6.
(2) Your device’s configuration won’t be lost after upgrading.
(3) The above firmware is fully adapted to Omada SDN Controller v5.9.
Feedback
Any further feedback on the new firmware, please feel free to comment below or start a new thread from HERE.
To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.
When reporting an issue, especially it's about firmware upgrade, it's suggested to include the following info:
- Management mode (Controller or Standalone)
- Device Model(s) and Hardware
- Device Firmware (previous and current)
Thank you in advance for your great cooperation and support.
Recommended Threads
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Current Available Solutions to Omada EAP Related Issues [Constantly Updated]
Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
KarlTheViking wrote
Regarding a date for a similar release for EAP 245 V3 customers it would be useful to know if TP-Link is even working on such an update.
Its all very well to ask us to keep checking the official website but that is a pointless exercise if TP-Link are not even planning to release any further firmware updates for the EAP245 V3 product.
Can you please determine if further firmware updates are planned for the EAP 245 V3 and then advise us accordingly? It's been over a year since the last V3 firmware update and I'm reluctant to keep checking for further updates if none are planned.
Thank you for your support and understanding.
Thanks for sharing your concern here. I understand your feeling. And I can tell you the next version of EAP245 V3 is under processing. Thus you can expect the upgrade of EAP245 V3 in the future. But the ETA and whether there will be pre-release on forum cannot be guaranteed. I will provide the link on forum once I get the pre-release version. Meanwhile please also keep an eye on the official websie/update notice on controller. Thanks for patience.
- Copy Link
- Report Inappropriate Content
@Hank21 You must get update released for EAP245 V3 we have over 30+ of these in working at our workplace and these was purchased a year back only as in our country only the V3 model was available from your official distributors.
We need the Lock to AP Feature mainly for our fixed Devices.
- Copy Link
- Report Inappropriate Content
Thanks for the info about development of next firmware upgrade for EAP245 v3, even without an ETA.
- Copy Link
- Report Inappropriate Content
@Hank21, Thank you for confirming that an update for the EAP245 V3 product is in process. I appreciate your confirmation. Like many other customers we have deployed a large number of EAP245 V3 access points over the last 18 months and the Lock to AP feature is really important to us. We have a lot of fixed IOT devices that we need to lock to particular access points for both security and reliability reasons. I will continue to watch for announcements on EAP245 V3 firmware updates. Please do let the developers know that their good work is important to us.
- Copy Link
- Report Inappropriate Content
I have 2 eap670s, an eap610, and eap650 outdoor. Where can i find out if lock to AP is working for those models yet? Given the reported issues with enabling it before it's supported, i don't want to test myself, but i have several static devices that keep connecting to weak signal APs.
I've been checking back for over a year since i found this option in the controller, and answers are less than help
- Copy Link
- Report Inappropriate Content
Strikingviking2 wrote
I have 2 eap670s, an eap610, and eap650 outdoor. Where can i find out if lock to AP is working for those models yet? Given the reported issues with enabling it before it's supported, i don't want to test myself, but i have several static devices that keep connecting to weak signal APs.
I've been checking back for over a year since i found this option in the controller, and answers are less than help
The firmware that are fully adapted to Omada SDN Controller v5.9 will support ‘Lock to AP’ function. May I know your controller version, and the hardware & firmware version of these EAPs?
- Copy Link
- Report Inappropriate Content
Hank21 wrote
I have not been informed about advanced notice of whether there will be new updates being released for EAP245 V3 by now and I cannot provide a definite answer. We recommend keeping an eye on our official website or forum.
Thanks for patience.
@Hank21 the other versions were launched months ago, can't you check with the devs whether they have forgotten the EAP245 V3 ?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
controller v5.13.30.8
eap650 outdoor v1.0 firmware 1.1.3
eap610 v2.0 firmware 1.1.7
eap670 v1.0 firmware 1.0.14
- Copy Link
- Report Inappropriate Content
Give me some time I will check it with firmware engineers again.
RBL wrote
Hank21 wrote
I have not been informed about advanced notice of whether there will be new updates being released for EAP245 V3 by now and I cannot provide a definite answer. We recommend keeping an eye on our official website or forum.
Thanks for patience.
@Hank21 the other versions were launched months ago, can't you check with the devs whether they have forgotten the EAP245 V3 ?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4971
Replies: 35
Voters 0
No one has voted for it yet.